Entry Point Template
See Configuration page.
Transaction Related Data
Use the following tags (5F3601025F2A020356) in Other TLVs section:
5F360102 Transaction Currency Exponent
5F2A020356 Transaction Currency Code
See Transaction page.
Administrative Settings
Set ID Message Display = 1 in Administrative to clarify the identification of the message in the signals tab
For tests requiring the TVR, set Always Receipt = 1 in Administrative. Set Always Receipt = 0 for tests on record printing.
See TMS/Administrative dialog.
Test Case Execution
TA's configurations are driven by the tools that are used to qualify a kernel. For Interac Flash, ICC Solution is accredited. That tool doesn't define any configuration for each test case. Hence, the tester shall adapt the default configuration (CONF_01) depending on the test requirements.
Note:
PROCESSING message display may be removed using flag in DF1B.
Terminal Country Code must be set to 0356 in TERMINAL configuration
See Test Cases Execution page.
Service Configuration
For test cases requiring Services, some tags are mandatory to initiate the Data Exchange mechanism.
Tag FF12 (AGNOS_RUPAY_SERVICES_LIST) must be present for requesting tag DF07 in the final select.
Rupay Service List Data, this FF02 must be present in the configuration. It’s a composed tag containing all services supported and data required for these services (excepted keys).
FF02 Structure:
FF02 variable Length
FF03 Variable Length including these 3 TLVs below:
DF16 Terminal Service ID on 2 bytes
DF45 Terminal Service Data (variable length) AGNOS_SERVICE_DATA_FROM_CONFIGURATION
DF99 RuPay Terminal Service Qualifier on 5 bytes.
FF03 … (for another service supported by terminal) if any…