Amadis
Test Cases Execution - Interac
This section presents some ACE hints related to test cases executions that might lead to configuration errors.
See ACE Client to get more details on how to use ACE.
ItemRec002
Set transaction type to REFUND
Rec003
Set transaction type to REFUND
Rec003-04
Set transaction type to REFUND
Trans02
Set transaction type to REFUND
PreInit06
Set transaction type to REFUND
FormFactor07-01
Set DF1B to DF1B0203b6
RetryChecks03
Set DF1B to DF1B0203b4
RetryChecks04
Set DF1B to DF1B0203b4
Mess017
Set DF1B to DF1B0201b4
GenAC003
Set transaction amount above Floor Limit = 8000
PreInit19
Set Terminal Floor Limit and Reader Contactless Floor Limit to 0
Comp007
Set issuer response to 5050 (to emulate host timeout)
Comp002
Set issuer response to 3551 (51) to emulate host decline
Comp012
Set issuer response to 3551 (51) to emulate host decline
FormFactor07
Use DF1B and declare the terminal's version = v 1.4
xxx
Set issuer response 3839 (89) to trigger a cardholder verification from host
Select02
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Interface02
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_01
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_02
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_03
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_04
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_05
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_06
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select10_1_07
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select11_1_01
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
Select11_1_02
Perform a contact transaction. Use a dual configuration (multiple AIDs for CT and CL)
TAA06_01
Set TOS Byte 1 and Byte 2 = 000xxxxx
TAA06_02
Set TOS Byte 1 and Byte 2 = 000xxxxx
TAA06_03
Set TOS Byte 1 and Byte 2 = 000xxxxx
CTRM04
Set TOS Byte 1 and Byte 2 = 010xxxxx
CTRM05_1
Set TOS Byte 1 and Byte 2 = 000xxxxx
CTRM05_2
Set TOS Byte 1 and Byte 2 = 010xxxxx
CTRM06
Set TOS Byte 1 and Byte 2 = 100xxxxx
CTRM08
Set TOS Byte 1 and Byte 2 = 000xxxxx
CTRM10
Set TOS Byte 1 and Byte 2 = 010xxxxx
CTRM13
Set TOS Byte 1 and Byte 2 = 001xxxxx
CardVer002
Set TAC Online to 0000040000
TAA01
Update TAC values accordingly
TAA13_01
Update TAC values accordingly
TAA13_02
Update TAC values accordingly
TAA13_03
Update TAC values accordingly
TAA15_01
Update TAC values accordingly
TAA15_02
Update TAC values accordingly
TRM01
Update TAC values accordingly and use transaction amount above 10000
TRM02
Update TAC values accordingly and use transaction amount below 8000