Amadis

Setting Configurations

Owned by Seyhmus Cacina (Unlicensed)

Last updated: Jun 18, 2021 by Frederic Solecki (Unlicensed)

2 min read

TERMINAL, PROCESSING, and ENTRY POINT are the 3 main configuration files used by Agnos' card processing:

1 Terminal Configuration
2 Processing Configuration
3 EntryPoint Configuration

Terminal Configuration

1. In Configuration->Terminal Configuration->Contact Only, set the parameters for:

If a contact reader exists (EMV) and/or a magstripe reader (magstripe)
The terminal country code, type, capabilities, additional capabilities…

2. In Configuration->Terminal Configuration->Contactless Only, set the parameters for:

EMV if a contactless reader exists and need to test contactless transactions. Otherwise this is left un-checked as for contact testing.

3. Send the configuration to the terminal using the "Send" button
4. Save your configuration with the "Save" or "Save As" button and reload it after using the "Open" button

Processing Configuration

Select the Authority or library name
Select the test configuration
Then click “Ok” to refresh the ACE Client window.

EntryPoint Configuration

Select the Authority or library name
Select the test configuration
Then click “Ok” to refresh the ACE Client window.