Amadis
Kernel EFTPOS Configuration Data
NOTE: Details about Agnos Tags for Configuring this Kernel can be found at EFTPOS Kernel Settings
IMPORTANT: The Kernel ID to be used for the EFTPOS Kernel is 42h (0x42)
The following Table shows the correspondance between OLA Tags versus Agnos Tags for Configuring the EFTPOS Kernel:
OLA Tag | Agnos Tag | Format | Length | Description |
---|---|---|---|---|
‘9F09’ | ‘9F09’ | b 2 | 2 | Application Version Number (AVN) |
‘9F1A’ | ‘9F1A’ | n 3 | 2 | Terminal Country Code |
‘9F33’ | ‘9F33’ | b 3 | 3 | Terminal Capabilities |
‘9F35’ | ‘9F35’ | n 2 | 1 | Terminal Type |
‘9F40’ | ‘9F40’ | b 5 | 5 | Additional Terminal Capabilities |
‘9F66’ or ‘DF05’ | ‘9F66’ | b 4 | 4 | Terminal Transaction Qualifier (TTQ) |
‘DF06’ | ‘DF30’ | b 1 | 1 | Status Check Support Flag |
‘DF07’ | ‘DF30' | b 1 | 1 | Zero Amount Allowed Flag |
‘DF08’ or ‘DF8124’ | ‘DF24’ | n 12 | 6 | Reader Contactless Transaction Limit (RCTL) |
‘DF09’ or ‘DF8123’ | ‘DF23’ | n 12 | 6 | Reader Contactless Floor Limit (RCFL) |
‘DF0B’ or ‘DF8126’ | ‘DF26’ | n 12 | 6 | Reader CVM Required Limit (RCRL) |
‘DF1E’ | ‘DF20’ | b 5 | 5 | Terminal Action Code (TAC) - Default |
‘DF1F’ | ‘DF21’ | b 5 | 5 | Terminal Action Code (TAC) - Denial |
‘DF20’ | ‘DF22’ | b 5 | 5 | Terminal Action Code (TAC) - Online |
‘DF811B’ | ‘DF1B’ | b 1 | 1 | Kernel EFTPOS Configuration (default = 80h) |
‘DF812D’ | ‘DF2D’ | n 6 | 3 | Message Hold Time |
'xxxx' | ‘DF30’ | b 1 | 1 | Agnos Entry-Point Bitmap (constructed dynamically): |
Yellow | Implementation not fully compliant with nexo-FAST Specifications |
Gray | Field ignored by the EFTPOS Kernel |