Amadis
TMS/Administrative Dialog
This dialog allows ACE to set a specific execution mode depending on testing context. If Kizis is up at opening time then the dialog box below displays the current status of Kizis.
The fields are:
Field | Execution Context | Comment | Value |
---|---|---|---|
FallbackAID | n/a | Deprecated | n/a |
Entry Point | n/a | Deprecated | n/a |
Default Transaction Type | Default9C | Defaut transaction type if 9C not defined in TRD | Any valid value. See Transaction Type |
Always Receipt | AlwaysReceipt | A receipt is systematically printed in CL | 0 or 1 |
Contactless | CL | Contactless transaction are supported | 0 or 1 |
Trace Depth | TraceDepth | 0: mute logs. 1: mute logs and display APDU asynchronously 2: GPI logs 3: Agnos logs 4: AgnosMW and Kizis logs 5: All logs 6: Offline APDU logs 7: Timestamp | Any values between 0 and 7 |
Default Language | DefaultLanguage | Default language identifier as defined in lang.ini (if supported) | Any values between 1 and maximum supported language |
Transaction Looping | TransactionLooping | Activate/Deactivate looping mode. In looping mode, Kizis keeps the hand to run N transactions in a row without going online (for cross-testing only). Use time's second to set the number of loops | 0 or 1 |
Key In | KeyIn | Activate/Deactivate STOP BUTTON management during polling, apdu exchanges, and data exchange | 0 or 1 |
Signal | Signal | Activate/Deactivate CL signals | 0 or 1 |
Polling Timeout | n/a | Polling time out supported by GPI | Double digit value in seconds |
Zip Legacy | LegacyZIP | Deprecated | n/a |
DE Callback | DE | Activate/Deactivate data exchange mechanism | Allways set it to 1 |
APDU Log | APDULog | Activate/Deactivate APDU traces into log file and ACE | 0 or 1 |
UI Display | UIDisplay | Activate/Deactivate UI display on ACE from GPI | 0 or 1 |
Replay | Replay | Activate/Deactivate card emulation using a log file. See Card Emulation | 0 or 1 |
PayPass Legacy | LegacyPayPass | Activate/Deactivate legacy mode for application selection | Must be set to 1 |
Amex Legacy | LegacyAMEX | Activate/Deactivate legacy mode for application selection | 0 or 1 |
JCB Legacy | LegacyJCB | Activate/Deactivate legacy mode for application selection | 0 or 1 |
CUP Legacy | LegacyCUP | Activate/Deactivate legacy mode for application selection | 0 or 1 |
DPAS Legacy | LegacyDPAS | Deprecated | n/a |
Id Message Display | IdMessageDisplay | Display or not the message ID in CL signals | 0 or 1 |
Tag Log | TagLog | Log all AgnosDB tags at the end of a contactless transaction | 0 or 1 |
Visa Legacy | LegacyVisa | Activate/Deactivate legacy mode for application selection | 0 or 1 |
Digital Signals | DigitalSignals | Display or not the signal value and corresponding label (Mastercard GTBI compliance) | Allways set it to 1 |
Check Unable to Go Online | RFU | Check unable to go online at the beginning of an American Express transaction. | 0 or 1 |
Send POI Information | RFU | Activate/Deactivate the Send POI Information | 0 or 1 |
RFU | RFU | RFU | 0 or 1 |
RFU | RFU | RFU | 0 or 1 |
RFU | RFU | RFU | 0 or 1 |
Note: these options settings correspond to a standard ACE version. However, they might be adapted according specific needs and constraints.