Agnos EftPos 22.02
The list of options presented here reflects the qualification reference used at Amadis to test Agnos kernels with appropriate tools (EVAL or ICC Solutions). It doesn't reflect TA requirements nor most up-to-date optional/mandatory features released by payment networks. Please refer to your lab to validate your ICS before any debug or TA.
This reference ICS doesn't document EFTPOS values to be set (i.e., customers requirements) but Agnos supported values and how to set them in regards with any potential EFTPOS ICS.
Reader Characteristics | Reference Values | Agnos | Configuration Values | Recommendations | Comments |
---|---|---|---|---|---|
Contactless transaction types supported | |||||
Purchase | Yes | Mandatory | No | Use TRD to set the value | |
Purchase with cash out | Yes/No | Optional | Yes | Use TRD to set the value | |
Cash out (Cash) | Yes/No | Optional | Yes | Use TRD to set the value | |
Refund | Yes/No | Optional | Yes | Use TRD to set the value | |
Cash Deposit | Yes/No | Optional | 9C | No | Use TRD to set the value |
Preprocessing | |||||
Status Check | Yes/No | Optional | DF30-B1b8 | Yes | Use ENTRYPOINT Configs to set the value |
Zero Amount Authorized is supported | Not Supported | Optional | None | N/A | |
fixed transaction amount processing supported | Not Supported | Optional | None | ||
Reader contactless transaction limit | Yes/No | Optional | DF30-B1b6 | Yes | Use ENTRYPOINT Configs to set the value |
Reader contactless floor limit | Yes | Mandatory | DF30-B1b5 | No | Use ENTRYPOINT Configs to set the value |
Terminal Floor Limit (9F1B) | Not Supported | Optional | None | ||
Terminal Transaction Qualifiers | Yes | Mandatory | No | Use ENTRYPOINT Configs to set the value | |
Offline data authentication | |||||
CDA | Yes | Mandatory | No | Use ENTRYPOINT Configs to set the value | |
Max Length of CA PK (248 Bytes) Supported | Yes (Covered By Default) | Optional | None | ||
Transaction processing capability | |||||
Offline only | Yes/No | Optional | Aligned with Terminal Type | Use ENTRYPOINT Configs to set the value | |
Online only | Yes/No | Optional | Aligned with Terminal Type | Use ENTRYPOINT Configs to set the value | |
Offline and Online | Yes/No | Optional | Aligned with Terminal Type | Use ENTRYPOINT Configs to set the value | |
Cardholder verification | |||||
Online PIN | Yes/No | Optional | Yes | Use ENTRYPOINT Configs to set the value | |
No CVM supported | Yes/No | Optional | Yes | Use ENTRYPOINT Configs to set the value | |
Consumer Device CVM (CDCVM) | Yes/No | Mandatory | 9F66-B3b7 | No | Use ENTRYPOINT Configs to set the value |
Fail CVM | Yes (Covered by default) | Optional | None | ||
Pre-Terminal Action Analysis | |||||
Skip CVM and Post-TAA, if AAC for GENERATE AC command | Yes (Covered by default) | Mandatory | None | N/A | |
Terminal Configuration Parameter | |||||
TAC-Denial | Yes | Mandatory | No | Use ENTRYPOINT Configs to set the value | |
TAC-Online | Yes | Mandatory | No | Use ENTRYPOINT Configs to set the value | |
TAC-Default | Yes/No | Optional | Yes | Use ENTRYPOINT Configs to set the value | |
Unable to Go Online | Yes (Covered by default) | Mandatory | None | ||
Terminal Type | |||||
Attended POS | Yes/No | Optional | Aligned with Transaction processing capability | Use ENTRYPOINT Configs to set the value | |
Unattended POS | Yes/No | Optional | Aligned with Transaction processing capability | Use ENTRYPOINT Configs to set the value | |
Contactless Only Interface Supported | Yes/No | Optional | 9F33 | Use ENTRYPOINT Configs to set the value |