That level of API is important to be able to run valid test procedures. It provides an interface to Agnos Certification Environement (ACE) through a set of services that corresponds to different test requirements specified by payment networks.
This API is the second level of integration for Agnos Framework. Hence, It is recommended to unit test all the services below outside the execution of a transaction before starting functional tests.
ACE Services
ACE Services | Description | Prerequisites to a Call |
---|---|---|
aceInitialize | ||
aceInitializeCommunication | ||
aceSetMode | There are three running modes defined in ACE:
Use pmSDK for unit testing ACE integration | |
aceGetMode | Get current ACE mode | -- |
aceGetRequest | ||
aceSendResponse | ||
aceMsgToACE | ||
aceClearScreen | Clear ACE screen | -- |
aceDisplayMessage | ||
aceEmptyKeyPadCache | ||
aceLogAPDU | ||
aceLogAllBatchedAPDU | ||
acePlayBeep | Play a beep in ACE | -- |
aceGetKey | Get key from ACE | -- |
aceSwitchLED | Switch a LED on ACE | -- |
aceOut | Out in ACE’s Console Log | aceOut("Hello World!"); // Open Console Log under ACE prior the unit test |
Signals Services
//--------------------------------------------------------- // SIGNALS (paymenMW.h) //--------------------------------------------------------- // These services has been implemented only to support certification sessions. typedef void (*sgnSendOutcome)(tOutComeParameter *outcome); typedef void (*sgnSendDR)(tPaymentContext *payment); typedef void (*sgnSendDD)(tPaymentContext *payment); typedef void (*sgnSendRawDD)(tByte *data, tWord dataLen); typedef void (*sgnSendDEK)(tPaymentContext *payment, tByte ADPUState, tBoolean sendDataNeeded, tByte* outDET, tWord* lenOutDET); typedef void (*sgnSendDET)(tPaymentContext *payment); typedef void (*sgnSendTag)(tPaymentContext *payment); #ifdef PACKING #pragma pack(1) #endif typedef struct { sgnSendOutcome mSendOutcomeSignal; sgnSendDR mSendDRSignal; sgnSendDD mSendDDSignal; sgnSendRawDD mSendRawDDSignal; sgnSendDEK mSendDEKSignal; sgnSendDET mSendDETSignal; sgnSendTag mSendTagSignal; } tSignal; #pragma pack() DLLEXPORT void pmwSetSignal(tSignal *signal); DLLEXPORT void pmwSendOutcome (tOutComeParameter *outcome); DLLEXPORT void pmwSendDR (tPaymentContext *payment); DLLEXPORT void pmwSendDD (tPaymentContext *payment); DLLEXPORT void pmwSendRawDD (tByte *data, tWord dataLen); DLLEXPORT void pmwSendDEK (tPaymentContext *payment, tByte ADPUState, tBoolean sendDataNeeded, tByte* outDET, tWord* lenOutDET); DLLEXPORT void pmwSendDET (tPaymentContext *payment); DLLEXPORT void pmwSendTag (tPaymentContext *payment);
Signals Services | Description | Prerequisites to a Call |
---|---|---|
aceGetSignal | Get all signals services from ACE in order to set signals callbacks defined in AgnosMW. These signals callbacks are called by Agnos components like AgnosEP and kernels to raise information at ACE level during a transaction |
#include "paymentMW.h" void setSignals() { tBoolean contactless = bTRUE; tBoolean signal = bTRUE; tSignal signal; if(contactless && signal) { aceGetSignal(&signal); } else { signal.mSendOutcomeSignal = 0; signal.mSendDRSignal = 0; signal.mSendDDSignal = 0; signal.mSendRawDDSignal = 0; signal.mSendDEKSignal = 0; signal.mSendDETSignal = 0; signal.mSendTagSignal = 0; } pmwSetSignal(&signal); } |
aceSendAdvancedDisplayAsOutcome | Send Advanced As Outcome signal to ACE |
tUIRequestData data; dtxInitializeUIRequestData(&data); aceSetDigitalSignal(0); aceSendAdvancedDisplayAsOutcome(&data); aceSetDigitalSignal(1); aceSendAdvancedDisplayAsOutcome(&data); |
aceSendAdvancedDisplay | Send Advanced signal to ACE |
tUIRequestData data; dtxInitializeUIRequestData(&data); aceSetDigitalSignal(0); aceSendAdvancedDisplay(&data); aceSetDigitalSignal(1); aceSendAdvancedDisplay(&data); |
aceSendOutcome | Send an Outcome signal to ACE |
tOutComeParameter outcome; pmwInitializeOutComeParameter(&outcome); aceSendOutcome(&outcome); |
aceSendDR | Send a Data Record signal to ACE |
tPaymentContext pay; pmwInitializePaymentContext(&pay); aceSendDR(pay); // Set mDataRecord to see TLV displayed |
aceSendDD | Send a Discretionary Data signal to ACE |
tPaymentContext pay; pmwInitializePaymentContext(&pay); aceSendDD(pay); // Set mDataRecord to see TLV displayed |
aceSendRawDD | Send a Raw Discretionary Data signal to ACE |
aceSendRawDD((tByte*)"\x9F\x02\x06\x99\x99\x99\x99\x99\x99",0x0009); |
aceSendDEK | Send a DEK signal to ACE |
tPaymentContext pay; tByte outDET[50]=""; tWord lenOutDET=0; pmwInitializePaymentContext(&pay); aceSendDEK(pay,asGPO,bFALSE,outDET,&lenOutDET); |
aceSendDET | N/A | N/A |
aceSendTag | Send all tags contained in AgnosDB session |
tPaymentContext pay; tTransactionalContext txnContext; tSessionId session; agnOpenSession("","","",&txnContext,bFALSE,bFALSE,&session,bFALSE,bFALSE); pmwInitializePaymentContext(&pay); aceSendTag(&pay); agnCloseSession(session); |
Financial Services
Financial Services | Description | Prerequisites to a Call |
---|---|---|
aceSendEMVContactAuthorization | Send an online auth. to ACE for EMV CT transactions |
tPaymentContext pay; pay.mDataExchange.mDataRecord.mLength = 0x0009; gpiMemCpy(pay.mDataExchange.mDataRecord.mStream,(tByte*)"\x9F\x02\x06\x99\x99\x99\x99\x99\x99",pay.mDataExchange.mDataRecord.mLength); aceSendEMVContactAuthorization(pay,bFALSE); |
aceSendEMVContactReversal | Send a reversal to ACE for EMV CT transactions |
|
aceSendEMVContactBatch | Send a batch to ACE for EMV CT transactions |
|
aceSendEMVContactAdvice | Send an advice to ACE for EMV CT transactions |
|
aceSendContactlessAuthorization | Send an online auth. to ACE for EMV CL transactions |
|
aceSendContactlessBatch | Send a batch to ACE for EMV CL transactions |
|
aceSendMagstripeAuthorization | Send an online auth. to ACE for magstripe transactions |
|
Options Services
Options Services | This set of primitives is not dependent on the platform. It doesn’t require specific implementation or modification for a given integration. Hence, it works as is. |
---|---|
Trace | Trace = 0 will log APDU commands and responses to ACE Trace 1 to max = will log commands and reponses to logout and only commands to ACE Trace > max will log commands and responses offline |
Automation | Reserved to Agnos Framework maintenance |
Signal | Enable/disable signals display in ACE (in pmSDK mode) |
APDULog | Enable/disable APDU logging (in pmSDK mode) |
UIDisplay | Enable/disable UI services in ACE from the device |
ID Message Display | Enable/disable message display (in signals) along with their message identifier |
Digital Signal | Enable/disable digital signals display following standard bitmap as defined by EMVCo |