Configuration Management
From the Configuration page, the following configurations can be manipulated:
Configuration | Creation | Modification | Open | Save | Send | Download |
---|---|---|---|---|---|---|
✔ | ✔ | ✔ | ✔ | ✔ | ||
✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |
✔ |
TERMINAL tab
This tab is split up into 3 sections:
Dual: Define parameters independent from the technology
Contact Only: Define L2 ICS parameters from the fields pertaining to this section
Contactless Only: Enable and define Contactless parameters
Fields
Field | Comment | Value |
---|---|---|
Dual | ||
Chip | Activate/Deactivate EMV Contact | 0 or 1 |
Swipe | Activate/Deactivate Magstripe Swipe | 0 or 1 |
PIN timeout | Define the PIN timeout in number of seconds. | 0 to 99 |
Contact | ||
Terminal Type | Define the Terminal type (tag 9F35) | 00 or |
Terminal Capabilities | Define the Terminal Capabilities (tag 9F33) | see 9F33 |
Additional Terminal Capabilities | Define the Additional Terminal Capabilities (tag 9F40) | see 9F40 |
Terminal Country Code | Define the Terminal Country Code (tag 9F1A) | see 9F1A |
Cardholder Confirmation | Activate/Deactivate Cardholder confirmation | 0 or 1 |
PSE | Activate/Deactivate PSE selection | 0 or 1 |
PIN Bypass | Activate/Deactivate PIN bypass | 0 or 1 |
RTS not suppported | Activate/Deactivate Random Transaction Selection | 0 if supported |
Velocity not suppported | Activate/Deactivate Velocity checking | 0 if supported |
CDA Type | Define the CDA Type | UNDEFINED or |
Default TAC | Activate/Deactivate default TACs | 0 or 1 |
TAC Denial | Default TAC denial value | same as TVR |
TAC Defaut | Default TAC default value | same as TVR |
TAC Online | Default TAC online value | same as TVR |
Online Data Capture | Activate/Deactivate Online Data Capture (ODC) | 0 or 1 |
Referral Managed | Activate/Deactivate Referral | 0 or 1 |
Advice Managed | Activate/Deactivate Advice | 0 or 1 |
Contactless Only | ||
EMV | C-1: n/a | 0 or 1 |
Autorun | Set PoP to auto run mode, i.e a preprocessing is performed right after transaction disposition to allow the system to resume with a start B and a polling (vending machine case) | 0 or 1 |
Predefined amount | If Autorun defined then Predefined amount is used as for 9F02, amount authorized | Any valid value below 10000 |
Actions
Button | Action |
---|---|
Open | Open a TERMINAL file. TERMINAL files are created by the actions Save or Save as. The format is binary and it contains the hexadecimal values of TERMINAL fields. |
Save | Save or Create a TERMINAL file. The format is binary and it contains the hexadecimal values of TERMINAL field. |
Save As | Create a TERMINAL file with a new name. The format is binary and it contains the hexadecimal values of TERMINAL field. |
Send | Send the TERMINAL to acceptance system. |
PROCESSING tab
This tab is split up into 2 sections:
AID
EMV parameters
⇒ AID
The list contains all supported AID being contact or contactless.
⇒ EMV Parameters\Contact
For each AID, define appropriate EMV parameters aligned on L2 ICS.
⇒ EMV Parameters\Dual
For each AID, define only:
Acquirer Id field. See 9F01
ASI field (Application Selection Indicator = short AID selection)
ENTRY_POINT tab
This tab is used only for CL kernels configurations. For each combination, define:
A Kernel Id
An AID Id (aligned on Processing configuration page)
A TLV Data Object
Each CL kernel uses its own set of EMV parameters. Hence, a TLV Data Object depends on a Kernel Id. Click on TLV's icon (on the left) to display the corresponding kernel's combination configuration template.
See Agnos Certification Environment TA Sessions.
Important: load PROCESSING or define AID in PROCESSING first. The AID Ids in ENTRY_POINT depend on the AID order defined in PROCESSING.
Starting with version 3.2.28, AID Ids may be automatically modified if their values are above the number of AID in PROCESSING.
The following dialog lists automatic modifications:
C-2/MASTERCARD Data Storage tab
This tab is used only for C-2/MASTERCARD CL Data Storage mandatory from specifications version 3.1.
The field is read-only. It displays the content of currently loaded xml file.
C-3/VISA DRL tab
This tab is used only for C-3/VISA CL Dynamic Reader Limits (DRL) configurations.
The Application Program Identifier must be first set before defining the Dynamic Reader Limits risk parameter.
Note: up to 4 Dynamic Reader Limits can be used. The default Dynamic Reader Limits is computed from ENTRY_POINT configuration.
Actions
Button | Action |
---|---|
Open | Open a DRL file. DRL files are created by the actions Save or Save as. The format is binary and it contains the hexadecimal values of DRL fields. |
Save | Create or save a DRL file. The format is binary and it contains the hexadecimal values of DRL field. |
Save As | Create a DRL file with a new name. |
Send | Send the DRL to acceptance system. |
ACE | Download DRL file from ACE Server. |
C-4/AMERICAN EXPRESS tab
This tab is used only for C-4/AMERICAN EXPRESS CL Dynamic Reader Limits (DRL) configurations.
There is no Application Program Identifier in American Express Dynamic Reader Limits.
Note: up to 17 Dynamic Reader Limits can be used. The default Dynamic Reader Limits is the first in the configuration.
Actions
Button | Action |
---|---|
Open | Open a DRL file. DRL files are created by the actions Save or Save as. The format is binary and it contains the hexadecimal values of DRL fields. |
Save | Create or save a DRL file. The format is binary and it contains the hexadecimal values of DRL field. |
Save As | Create a DRL file with a new name. |
Send | Send the DRL to acceptance system. |
Actions
Button | Action |
---|---|
Load DEK DET | Load a DEK DET xml file into DEK DET field |
Load DEK DET | Clear the DEK DET field |