Amadis
Setting Configurations
TERMINAL, PROCESSING, and ENTRY POINT are the 3 main configuration files used by Agnos' card processing:
Terminal Configuration
1. In Configuration->Terminal Configuration->Contact Only, set the parameters for:
If a contact reader exists (EMV) and/or a magstripe reader (magstripe)
The terminal country code, type, capabilities, additional capabilities…
2. In Configuration->Terminal Configuration->Contactless Only, set the parameters for:
EMV if a contactless reader exists and need to test contactless transactions. Otherwise this is left un-checked as for contact testing.
3. Send the configuration to the terminal using the "Send" button
4. Save your configuration with the "Save" or "Save As" button and reload it after using the "Open" button
Processing Configuration
Select the Authority or library name
Select the test configuration
Then click “Ok” to refresh the ACE Client window.
EntryPoint Configuration
Select the Authority or library name
Select the test configuration
Then click “Ok” to refresh the ACE Client window.