TERMINAL, PROCESSING, and ENTRY POINT are the 3 main configuration files used by Agnos' card processing:
Terminal Configuration
| Code Block |
|---|
|
1. In Configuration->Terminal Configuration->Contact Only, set the parameters for: |
If a contact reader exists (EMV) and/or a magstripe reader (magstripe)
The terminal country code, type, capabilities, additional capabilities…
Image Modified| Code Block |
|---|
|
2. In Configuration->Terminal Configuration->Contactless Only, set the parameters for: |
| Code Block |
|---|
|
3. Send the configuration to the terminal using the "Send" button
4. Save your configuration with the "Save" or "Save As" button and reload it after using the "Open" button |
Processing Configuration
| Code Block |
|---|
|
1. In Configuration->Processing, load the default test plan configuration, with the "ACE" button: |
Image Removed
Image AddedSelect the Authority or library name
Select the test configuration
Then click “Ok” to refresh the ACE Client window.
| Code Block |
|---|
|
2. If required, update the parameters to match your ICS
3. Send the PROCESSING configuration to the terminal using the "Send" button
4. Save your own Processing configuration using the "Save" or "Save As" button
5. Reload your own configuration using the "Load" button |
EntryPoint Configuration
| Code Block |
|---|
|
1. In Configuration->EntryPoint, load the default test plan configuration, with the "ACE" button for contactless tests only: |
Image ModifiedSelect the Authority or library name
Select the test configuration
Then click “Ok” to refresh the ACE Client window.
| Code Block |
|---|
|
2. If required, update the parameters to match your ICS, this per AID and per transaction type.
3. Send the ENTRYPOINT configuration to the terminal using the "Send" button
4. Save your own ENTRYPOINT configuration using the "Save" or "Save As" button
5. Reload your own configuration using the "Load" button |