General Information
The Atheos Gateway component handles the connections from the POIs. It listen by default on port 55554 for connections from the POIs. Only SSL connections are accepted.
Configuration
To be completed
Error and Messages
Failed to initialize the readdir() mutex | |
Cause | Cannot initialize an internal mutex. |
Action | Try restarting the Gateway. If it fails again, contact Amadis support. |
Connection manager has stopped with errors. | |
Cause | The Gateway stopped because of some fatal errors. |
Action | Look for the previous error. Fix it and restart the Gateway. |
Error writing the response to %1, port %2: error code = %3 | |
Cause | The Gateway could not send the response to the POIs. It is mainly caused by a network issue.
|
Action | Investigate the root cause of this error if it happens too often. It can be a programming error in very rare occasions. |
Message body truncated (expected = %1, received = %2) for %3, port %4 | |
Cause | The received message from the POI is shorter than expected. It is mainly caused by a network issue.
|
Action | Investigate the root cause of this error if it happens too often. It can be a programming error in very rare occasions. |
Error reading the message with %1, port %2: error code = %3 | |
Cause | An error occurred while reading a message from the POI. It is mainly caused by a network issue.
|
Action | Investigate the root cause of this error if it happens too often. It can be a programming error in very rare occasions. |
Wrong message header length (%1) for %2, port %3 | |
Cause | An error occurred while reading a message from the POI. It is mainly caused by a network issue.
|
Action | Investigate the root cause of this error if it happens too often. It can be a programming error in very rare occasions. |