Amadis
Get Configuration Data Command
This Command allows getting Configuration Parameters from the L2 Stack.
Command Parameters
Tag | Size (bytes) | Type | M/O/C | Description |
‘C5’ | 1 | b | M | Configuration Identifier |
‘DF3B’ | 0 | - | O | SHA-1 of Configuration Data BLOB |
‘C3’ | 0 | - | O | Configuration Version |
The Configuration Identifier (Tag ‘C5’) is mandatory and shall be encoded as described for the Set Configuration Data Command
The other Command Parameters (‘DF3B’ and ‘C3’) are Optional and shall have TLV length set to 0 to indicate which Configuration Parameters to be included in the Response Parameters.
Command Parameters containing only Config ID (Tag ‘C5’) indicates that the Response Parameters shall include all Configuration Parameters (i.e. ‘C5’, ‘DF3A’, ‘DF3B’ and ‘C3’).
Response Parameters
 The Response Parameters should include Configuration Parameters as requested in the Command Parameters for the given Configuration ID.
For example, given a TERMINAL Version set to ‘ICS v1.0.0’, the Command Parameters:
ID = TERMINAL, Version = ? | ||||
C5 | 01 | 80 | C3 | 00 |
Would return the Response Parameters:
ID = TERMINAL, Version = ‘CNT v1.0.0’ | ||||||||||||||
C5 | 01 | 80 | C3 | 0A | ‘I‘ | ‘C’ | ‘S’ | ‘ ‘ | ‘v’ | ‘1’ | ‘.’ | ‘0’ | ‘.’ | ‘0’ |
Error Codes
Code | Description |
0000h | Successful Execution |
2105h | Unsupported Configuration ID |
21FFh | System Error |
Â