Agnos Interac Flash 1.5x
The list of options presented here reflects the qualification reference used at Amadis to test Agnos kernels with appropriate tools (EVAL or ICC Solutions). It doesn't reflect TA requirements nor most up-to-date optional/mantory features released by payment networks. Please refer to your lab to validate your ICS before any debug or TA.
This reference ICS doesn't document Interac values to be set (i.e., customers requirements) but Agnos supported values and how to set them in regards with any potential Flash ICS.
Reader Characteristics | Reference Values | Agnos | Configuration Values | Recommendations | Comments |
|---|---|---|---|---|---|
a.3 Contactless only | Yes/No | Optional | No | Use COMBINATION to set the value | |
a.3.1 Contact applpication at other terminal | Yes/No | Optional | No | Use COMBINATION to set the value | |
a.1 Magstripe interface at terminal | Yes/No | Optional | No | L3 Perspective. Use COMBINATION to set the value | |
a.2 Contact interface at terminal | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
b.1 Display | Yes | Mandatory | Fixed | L3 perspective. Depends on platform. Use COMBINATION to set the value | |
b.2 Connected to a terminal with a display | No | Mandatory | Fixed | N/A | L3 perspective. Depends on platform |
c.1 Terminal is online capable | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
c.2 Terminal is offline only | No | Mandatory | Fixed | N/A | |
c.2 Terminal is online only | Yes/No | Optional | No | Use COMBINATION to set the value | |
d.1 Terminal supports online PIN | Yes/No | Optional | No | ||
d.2 Non zero contactless floor limits | Yes/No | Optional | Yes | ||
e.1 CDA at 1st genac | Yes/No | Optional | Yes | Use COMBINATION to set the value. Performance perspective (2 RSA computations while card in field) | |
f.1 Transaction login | No | Not Supported | N/A | N/A | |
g.1 Printer | Yes/No | Optional | N/A | Yes | L3 perspective. Depends on platform |
h.1 EMV legacy floor limit | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
j.1 Refund | Yes/No | Optional | N/A | Yes | L3 perspective |
j.2 Reversal | Yes/No | Optional | N/A | No | L3 perspective |
j.3 Pre-Auth | Yes/No | Optional | N/A | Yes | L3 perspective |
l.1 Form factor 00-01-02 | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
l.2 Form factor 03 | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
m.1 Specification v1.5 | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
x.1 Maximum Target Percentage | 00 | Variable | 50 | Use COMBINATION to set the value | |
x.2 Target Percentage | 00 | Variable | 30 | Use COMBINATION to set the value | |
x.3 Threshold Value | 000000 | Variable | 000000 | Use COMBINATION to set the value | |
x.4 Merchant Type Indicator | 03 | Optional | N/A | Use COMBINATION to set the value | |