1. In Configuration->Terminal Configuration->Contact Only, set the parameters for:
If a contact reader exists (EMV) and/or a magstripe reader (magstripe)
The terminal country code, type, capabilities, additional capabilities…
2. In Configuration->Terminal Configuration->Contactless Only, set the parameters for:
EMV if a contactless reader exists and you want to test contactless transactions. Otherwise this is left un-checked as for contact testing.
3. You have to send the configuration to the terminal using the "Send" button 4. You can save your configuration with the "Save" or "Save As" button and reload it after using the "Open" button
Processing Configuration
1. In Configuration->Processing, load the default test plan configuration, with the "ACE" button:
You have to select the Authority or library name
You have to select the test configuration
Then click “Ok” to refresh the ACE Client window.
2. If required, you have to update the parameters to match your ICS 3. You have to send the PROCESSING configuration to the terminal using the "Send" button 4. You can save your own Processing configuration using the "Save" or "Save As" button 5. You can reload your own configuration using the "Load" button
EntryPoint Configuration
1. In Configuration->EntryPoint, load the default test plan configuration, with the "ACE" button for contactless tests only:
You have to select the Authority or library name
You have to select the test configuration
Then click “Ok” to refresh the ACE Client window.
2. If required, you have to update the parameters to match your ICS, this per AID and per transaction type. 3. You have to send the ENTRYPOINT configuration to the terminal using the "Send" button 4. You can save your own ENTRYPOINT configuration using the "Save" or "Save As" button 5. You can reload your own configuration using the "Load" button