...
Agnos Interac Flash 1.
...
8
The list of options presented here reflects the qualification reference used at Amadis to test Agnos kernels with appropriate tools (EVAL or ICC Solutions). It doesn't reflect TA requirements nor most up-to-date optional/mantory features released by payment networks. Please refer to your lab to validate your ICS before any debug or TA.
This reference ICS doesn't document Interac values to be set (i.e., customers requirements) but Agnos supported values and how to set them in regards with any potential Flash ICS.
Reader Characteristics |
---|
Supported Values | Agnos | Configuration Values | Recommendations | Comments | |
---|---|---|---|---|---|
a.3 Contactless only | Yes/No | Optional | No | Use |
ENTRYPOINT Config to set the value |
a.3.1 Contact |
application at other terminal | Yes/No | Optional | No | Use |
ENTRYPOINT Config to set the value | |||||
a.1 Magstripe interface at terminal | Yes/No | Optional | No | L3 Perspective. Use |
ENTRYPOINT Config to set the value | |||||
a.2 Contact interface at terminal | Yes/No | Optional | Yes | Use |
ENTRYPOINT Config to set the value | |||||
a.5 Is the device a Transit Terminal | Yes/No | Optional | MTI=04 | ||
b.1 Display | Yes | Mandatory | Fixed | L3 perspective. Depends on platform. Use |
ENTRYPOINT Config to set the value | |||||
b.2 Connected to a terminal with a display | No | Mandatory | Fixed | N/A | L3 perspective. Depends on platform |
c.1 Terminal is online capable | Yes/No | Optional | Yes | Use |
ENTRYPOINT Config to set the value | |||||
c.2 Terminal is offline only | No | Mandatory | Fixed | N/A | Not permitted by Interac |
c.2 Terminal is online only | Yes/No | Optional | No | Use |
ENTRYPOINT Config to set the value | |||||
d.1 Terminal supports online PIN | Yes/No | Optional | No | ||
d.2 Non zero contactless floor limits | Yes/No | Optional | Yes | ||
e.1 CDA at 1st |
GENAC | Yes/No | Optional | Yes | Use |
ENTRYPOINT Config to set the value. Performance perspective (2 RSA computations while card in field) | |||||
f.1 Transaction login | No | Not Supported | N/A | N/A | |
g.1 Printer | Yes/No | Optional | N/A | Yes | L3 perspective. Depends on platform |
h.1 EMV legacy floor limit | Yes/No | Optional | Yes | Use |
ENTRYPOINT Config to set the value | |||||
j.1 Refund | Yes/No | Optional | N/A |
Yes
L3 perspective
Yes |
Optional
N/A
L3 perspective | |||||
j.3 Pre-Auth | Yes/No | Optional | N/A | Yes | L3 perspective |
l.1 Form factor 00-01-02 | Yes/No | Optional | Yes | Use |
ENTRYPOINT Config to set the value | |||||
l.2 Form factor 03 | Yes/No | Optional | Yes | Use |
ENTRYPOINT Config to set the value |
Transit Option Supported | Yes/No | Optional |
Yes
Autorun mode, MTI=04 | No | Autorun Mode is a level 3 perspective | |||
T.2 Blocklist Supported at transit terminal | No | Not Supported | N/A | Not Supported level 3 perspective | |
T.4 Terminal Contactless per transaction limit checking supported | No | Not Supported | N/A | Not Supported level 3 perspective | |
T.5 Multiple online transactions supported | Yes | Mandatory | N/A | Supported in level 2 kernel, must be implemented at level 3 | |
x.1 Maximum Target Percentage | 00 | Variable | 50 | Use |
ENTRYPOINT Config to set the value | |||||
x.2 Target Percentage | 00 | Variable | 30 | Use |
ENTRYPOINT Config to set the value | |||||
x.3 Threshold Value | 000000 | Variable | 000000 | Use |
ENTRYPOINT Config to set the value | |||||
x.4 Merchant Type Indicator | 03 | Optional | N/A | Use |
ENTRYPOINT Config to set the value (MTI=04 for Transit Terminal) |