Table of Contents | ||||
---|---|---|---|---|
|
Basic transaction
A basic OLA transaction includes the following steps:
OLA classes instantiation (once at startup)
Code Block |
---|
private val ola: Ola
private val contact: OlaContact
private val contactless: OlaContactless
private val emv: OlaEmv
private val dev: Dev
private val publicKey: OlaPublicKey
...
init {
ola = Ola.getInstance()
contact = OlaContact.getInstance()
contactless = OlaContactless.getInstance()
emv = OlaEmv.getInstance()
publicKey = OlaPublicKey()
...
} |
OLA component initialisation (once at startup)
Code Block |
---|
/**
* Configures OLA layer (key files paths, trace, etc...)
*/
private fun olaConfig() {
val path = byteArrayOf(0xdf.toByte(), 0x01, 28)
val pathValue = "/data/data/ca.amadis.tester/"
val cakeys = byteArrayOf(0xdf.toByte(), 0x02, 34)
val cakeysValue = "/data/data/ca.amadis.tester/CAKeys"
val crl = byteArrayOf(0xdf.toByte(), 0x03, 31)
val crlValue = "/data/data/ca.amadis.tester/CRL"
val efl = byteArrayOf(0xdf.toByte(), 0x04, 31)
val eflValue = "/data/data/ca.amadis.tester/EFL"
val pcsc = byteArrayOf(0xdf.toByte(), 0x05, 0x00) // pcsc not used
val lang = byteArrayOf(0xdf.toByte(), 0x06, 0x00) // lang not used
val runtimeParams = byteArrayOf(0xdf.toByte(), 0x07, 0x07, 0x00, 0x0F, 0x04, 0x0F, 0x0A, 0x00, 0x01)
val traceLevel = byteArrayOf(0xdf.toByte(), 0x08, 0x01, 0x05)
val pollingTechno = byteArrayOf(0xdf.toByte(), 0x10, 0x01, 0x04) // Contactless only
var sredMode: ByteArray
if (BuildConfig.FLAVOR.lowercase().contains("nosred")) {
sredMode = byteArrayOf(0xdf.toByte(), 0x17, 0x01, 0x00) // SRED mode not active
} else {
sredMode = byteArrayOf(0xdf.toByte(), 0x17, 0x01, 0x01) // SRED mode active
}
try {
val out = ByteArrayOutputStream()
out.write(path)
out.write(pathValue.toByteArray())
out.write(cakeys)
out.write(cakeysValue.toByteArray())
out.write(crl)
out.write(crlValue.toByteArray())
out.write(efl)
out.write(eflValue.toByteArray())
out.write(pcsc)
out.write(lang)
out.write(runtimeParams)
out.write(traceLevel)
out.write(pollingTechno)
out.write(sredMode)
ola.initializeAtStartUp(out.toByteArray())
} catch (e: IOException) {
}
} |
AID configuration
Code Block |
---|
private fun terminalContactlessConfig() {
Log.v("Transaction", "terminalContactlessConfig")
val contactlessCfg = arrayOf(
ContactlessCfg(AID.FromBytes(byteArrayOf(0xA0.toByte(), 0x00, 0x00, 0x00, 0x04, 0x10, 0x10)),
true,
2,
mcCfg),
ContactlessCfg(AID.FromBytes(byteArrayOf(0xA0.toByte(), 0x00, 0x00, 0x00, 0x04, 0x20, 0x10)),
true,
2,
mcCfg),
...)
contactless.flushAIDSupported()
for (config in contactlessCfg) {
contactless.addAIDSupported(
config.aid,
config.partial,
config.kernelId.toByte(),
config.additionalData
)
}
contactless.commitSupportedAIDs()
} |
Keys configuration
Code Block |
---|
private fun terminalPublicKeyConfig() {
Log.v("Transaction", "terminalPublicKeyConfig")
val publicKeyCfg = arrayOf(
/* MasterCard */
PublicKeyCfg(byteArrayOf(0xa0.toByte(), 0x00, 0x00, 0x00, 0x03),
0x92.toByte(),
byteArrayOf(0x99.toByte(), 0x6a, 0xf5.toByte(), 0x6f, 0x56, 0x91.toByte(), 0x87.toByte(), 0xd0.toByte(), 0x92.toByte(), 0x93.toByte(), 0xc1.toByte(), 0x48, 0x10, 0x45, 0x0e, 0xd8.toByte(), 0xee.toByte(), 0x33, 0x57, 0x39, 0x7b, 0x18, 0xa2.toByte(), 0x45, 0x8e.toByte(), 0xfa.toByte(), 0xa9.toByte(), 0x2d, 0xa3.toByte(), 0xb6.toByte(), 0xdf.toByte(), 0x65, 0x14, 0xec.toByte(), 0x06, 0x01, 0x95.toByte(), 0x31, 0x8f.toByte(), 0xd4.toByte(), 0x3b, 0xe9.toByte(), 0xb8.toByte(), 0xf0.toByte(), 0xcc.toByte(), 0x66, 0x9e.toByte(), 0x3f, 0x84.toByte(), 0x40, 0x57, 0xcb.toByte(), 0xdd.toByte(), 0xf8.toByte(), 0xbd.toByte(), 0xa1.toByte(), 0x91.toByte(), 0xbb.toByte(), 0x64, 0x47, 0x3b, 0xc8.toByte(), 0xdc.toByte(), 0x9a.toByte(), 0x73, 0x0d, 0xb8.toByte(), 0xf6.toByte(), 0xb4.toByte(), 0xed.toByte(), 0xe3.toByte(), 0x92.toByte(), 0x41, 0x86.toByte(), 0xff.toByte(), 0xd9.toByte(), 0xb8.toByte(), 0xc7.toByte(), 0x73, 0x57, 0x89.toByte(), 0xc2.toByte(), 0x3a, 0x36, 0xba.toByte(), 0x0b, 0x8a.toByte(), 0xf6.toByte(), 0x53, 0x72, 0xeb.toByte(), 0x57, 0xea.toByte(), 0x5d, 0x89.toByte(), 0xe7.toByte(), 0xd1.toByte(), 0x4e, 0x9c.toByte(), 0x7b, 0x6b, 0x55, 0x74, 0x60, 0xf1.toByte(), 0x08, 0x85.toByte(), 0xda.toByte(), 0x16, 0xac.toByte(), 0x92.toByte(), 0x3f, 0x15, 0xaf.toByte(), 0x37, 0x58, 0xf0.toByte(), 0xf0.toByte(), 0x3e, 0xbd.toByte(), 0x3c, 0x5c, 0x2c, 0x94.toByte(), 0x9c.toByte(), 0xba.toByte(), 0x30, 0x6d, 0xb4.toByte(), 0x4e, 0x6a, 0x2c, 0x07, 0x6c, 0x5f, 0x67, 0xe2.toByte(), 0x81.toByte(), 0xd7.toByte(), 0xef.toByte(), 0x56, 0x78, 0x5d, 0xc4.toByte(), 0xd7.toByte(), 0x59, 0x45, 0xe4.toByte(), 0x91.toByte(), 0xf0.toByte(), 0x19, 0x18, 0x80.toByte(), 0x0a, 0x9e.toByte(), 0x2d, 0xc6.toByte(), 0x6f, 0x60, 0x08, 0x05, 0x66, 0xce.toByte(), 0x0d, 0xaf.toByte(), 0x8d.toByte(), 0x17, 0xea.toByte(), 0xd4.toByte(), 0x6a, 0xd8.toByte(), 0xe3.toByte(), 0x0a, 0x24, 0x7c, 0x9f.toByte()),
byteArrayOf(0x03),
byteArrayOf(0x24, 0x12, 0x31)),
...)
publicKey.flush()
for (config in publicKeyCfg) {
val maxReached = SingleObjectHolder(false)
val key: PublicKeyData = publicKey.PublicKeyData(
config.rid,
config.idx,
config.modulus,
config.exponentValue,
config.expirDate
)
publicKey.add(key, null, maxReached)
}
publicKey.commit()
} |
Transaction related data ()
Code Block |
---|
private fun txnSetTransactionRelatedData() {
Log.v("Transaction", "txnSetTransactionRelatedData")
emv.setTag(OlaTag.TRANSACTION_DATE, byteArrayOf(0x20, 0x10, 0x28)) // 9A
emv.setTag(OlaTag.TRANSACTION_TIME, byteArrayOf(0x12, 0x00, 0x00)) // 9F21
emv.setTag(OlaTag.AMOUNT_AUTHORISED, byteArrayOf(0x00, 0x00, 0x00, 0x00, 0x01, 0x50)) // 9F02
emv.setTag(OlaTag.AMOUNT_OTHER_NUM, byteArrayOf(0x00, 0x00, 0x00, 0x00, 0x00, 0x50)) // 9F03
emv.setTag(OlaTag.TRANSACTION_CURRENCY_CODE, byteArrayOf(0x08, 0x40)) // 5F2A
emv.setTag(OlaTag.TRANSACTION_CURRENCY_EXPONENT, byteArrayOf(0x02)) // 5F36
emv.setTag(OlaTag.TRANSACTION_TYPE, byteArrayOf(0x00)) // 9C
/*
* Other possible tags to set here:
* Account Type (5F57)
* Transaction Category Code (9F53)
*
* All other tags must be set through the combinations!
*/
emv.setTag(0x9F53, byteArrayOf(0x11));
} |
Preprocessing
Code Block |
---|
private fun txnPreProcess(): OlaError {
Log.v("Transaction", "txnPreProcess")
val ret = contactless.preprocess()
if (ret != OlaError.OLA_OK) {
Log.e("Transaction", "txnPreProcess - contactless pre-process failed")
}
return ret
} |
Card detection
Code Block |
---|
private fun txnGetCard(): Int {
Log.v("Transaction", "txnGetCard - **** PRESENT CARD ****")
val foundTechnos = dev.technoPolling(30)
Log.v("Transaction", "txnGetCard - result of foundTechnos: $foundTechnos")
return if (foundTechnos == 4) {
clcEMV_CARD //TODO remove hard-coding
} else {
0
}
} |
Do transaction
Code Block |
---|
private fun doTransaction(): OlaError {
Log.v("Transaction", "doTransaction - buildCandidateList")
val nbCandidatesHolder = SingleObjectHolder<Int>()
var ret = contactless.buildCandidateList(nbCandidatesHolder)
if (ret != OlaError.OLA_OK) {
Outcome.showOutcome(contactless, ret)
}
Log.v("Transaction", "doTransaction - nb of candidates: ${nbCandidatesHolder.get()}")
Log.v("Transaction", "doTransaction - finalSelectCandidate")
val kernel_id_holder = SingleObjectHolder<Byte>()
ret = contactless.finalSelectCandidate(1, kernel_id_holder)
if (ret != OlaError.OLA_OK) {
Outcome.showOutcome(contactless, ret)
}
Log.v("Transaction", "doTransaction - doTransaction")
ret = contactless.doTransaction()
Outcome.showOutcome(contactless, ret)
if (ret == OlaError.OLA_OK) {
val bytesHolder = SingleObjectHolder<ByteArray>()
for (olaTag in batch) {
val result = emv.getTag(olaTag, bytesHolder)
if (result == OlaError.OLA_OK) {
Log.v("Transaction", "doTransaction - result for getTag(): $result => " +
Utils.bytesToHex(bytesHolder.get()))
} else {
Log.v("Transaction", "doTransaction - result for getTag(): $result => tag missing")
}
}
}
Log.d("Transaction", "doTransaction - **** REMOVE CARD **** ")
contactless.clean();
return ret
} |
Outcome and errors management
At the end of a transaction, the OlaOutcomeParameter
structure should be retrieved for analysis. To retrieve the outcome, use the following code:
Code Block |
---|
val olaOutcomeParameterHolder = Holders.SingleObjectHolder<OlaOutcomeParameter>()
val ret = agnos.olaContactlessGetOutcome(olaOutcomeParameterHolder)
val olaOutcomeParameter = olaOutcomeParameterHolder.get() |
Please refer to the Javadoc/Kotlindoc for more information on the OlaOutcomeParameter class.
The first element to verify is the value of the outcome
member. In a Tap to Phone environement, its value should be either of the following:
SelectNext,
TryAgain,
Declined
OnlineRequest,
EndApplication
The transaction should never be accepted offline.
EndApplication outcome
In case the outcome is EndApplication, the application should look into OlaErrorIndicator
element to understand what possibly caused the premature end of the transaction. To retrieve that information, one should use the following API:
Code Block |
---|
val olaErrorIndicatorHolder = Holders.SingleObjectHolder<OlaErrorIndicator>()
val ret = agnos.olaContactlessGetErrorIndicator(olaErrorIndicatorHolder)
val olaErrorIndicator: OlaErrorIndicator = errorHolder.get() |
The OlaErrorIndicator
class contains different levels of errors represented by the following members:
Code Block |
---|
OlaErrorL2 errorL2
OlaErrorL3 errorL3 |
Only one of them can be filled at once.
Please refer to the Javadoc/Kotlindoc for more information on the OlaErrorL2 and OlaErrorL3 values.