...
Agnos Discover
...
For Standard Devices DPAS 2.0 (ToM see below)
The list of options presented here reflects the qualification reference used at Amadis to test Agnos kernels with appropriate tools (EVAL or ICC Solutions). It doesn't reflect TA requirements nor most up-to-date optional/mantory features released by payment networks. Please refer to your lab to validate your ICS before any debug or TA.
This reference ICS doesn't document Discover values to be set (i.e., customers requirements) but Agnos supported values and how to set them in regards with any potential DPAS /ZIP ICS.
Reader Characteristics |
Supported Values | Agnos | Configuration Values | Recommendations | Comments | |
2.1 Terminal General Information |
Contactless Only | Yes/No | Optional |
N/A
Use COMBINATION to set the value
2.2 Terminal Implementation Information
Does the reader support EntryPoint?
Is Magstripe mode Supported ?
Yes
Mandatory
N/A
Magstripe mode corresponds to ZIP
if 9F33 is used, set in accordance with 9F66 | ||
Dual Interface (contact & Contactless) | Yes/No | Optional |
DPAS/ZIP Legacy flags
No
Use agnos.ini to set the values
if 9F33 is used, set in accordance with 9F66 | |||||
3.1 Application Selection | |||||
Does reader support Extended Selection? | Yes/No | Optional | Yes | Use |
Configuration to set the value | |||||
3.2 Cardholder Verification Method | |||||
Does the reader support Online PIN CVM? | Yes/No | Optional | Yes | Use |
Configuration to set the value | |||||
Does the reader support Signature CVM ? | Yes/No | Optional | Yes | Use |
Configuration to set the value | |
Does the reader support Confirmation Code (CDCVM)? | Yes |
Optional | Yes | Use |
Configuration to set the value | |||||
Does the reader support No CVM? | Yes/No | Optional | Yes | Use |
Configuration to set the value | |||||
3.3 Transaction Type | |||||
Does the reader support Cash transactions ? | Yes/No | Optional |
Yes | Use TRD to set the value | ||||
Does the reader support Purchase transactions ? | Yes/No | Optional | Yes | Use TRD to set the value | |
Does the reader support Purchase with Cash-Back transactions ? | Yes/No | Optional | Yes | Use TRD to set the value | |
Does the reader support Refund transactions ? | Yes/No | Optional | Yes | Use TRD to set the value | |
3.4 Terminal Type |
Offline Only configuration must be supported | Yes/No | Optional | 9F35 | Use Configuration to set the value | |
Online Only configuration must be supported | Yes/No | Optional | 9F35 | Use Configuration to set the value | |
Online & Offline configuration must be supported | Yes/No | Optional | 9F35 | Yes | Use Configuration to set the value |
Terminal can be configured as an ATM | Yes/No | Optional | 9F35 | No | Use Configuration to set the value |
3.5 Issuer Update | |||||
Does terminal support Issuer Updates? | Yes/No | Optional | 9F66 | Yes | Use Configuration to set the value |
3.6 Storage | |||||
Does terminal support Data Storage? | Yes/No | Optional | Yes | Use |
Configuration to set the value |
Is the device under test Online Only ?
No
Mandatory
N/A
N/A
Use COMBINATION to set the value
Does terminal support Extended Logging? | Yes/No | Optional | Yes | Use Configuration to set the value | |
3.7 Terminal Capabilities | |||||
Does terminal support Defered Authorization? | Yes/No | Optional | DF1B | Yes | |
Does terminal support Online ODA? | Yes/No | Optional | Yes | ||
Does terminal support Tearing Recovery? | Yes/No | Optional | Yes | Use Configuration to set the value | |
Is exception list supported? | Yes/No | Optional | N/A | Yes | Use corresponding Exception File List |
Agnos Discover For Tap On Mobile (ToM) Devices DPAS 2.0
The list of options presented here reflects the qualification reference used at Amadis to test Agnos kernels with appropriate tools (EVAL or ICC Solutions). It doesn't reflect TA requirements nor most up-to-date optional/mantory features released by payment networks. Please refer to your lab to validate your ICS before any debug or TA.
This ICS doesn't document Discover values to be set (i.e., customers requirements) but Agnos supported values and how to set them in regards with any potential DPAS ICS.
Reader Characteristics | Supported Values | Agnos | Configuration Values | Recommendations | Comments |
2.1 Terminal General Information | |||||
Does reader is contactless Only | Yes/No | Optional | Yes | if 9F35 is used, set in accordance with 9F66 | |
3.1 Application Selection | |||||
Does reader support Extended Selection? | Yes/No | Optional | Yes | Use Configuration to set the value | |
3.2 Cardholder Verification Method | |||||
Does the reader support Online PIN CVM? | Yes/No | Optional | Yes | Use Configuration to set the value | |
Does the reader support Signature CVM ? | Yes/No | Optional | Yes | Use |
Configuration to set the value |
Does the reader |
No
Mandatory
N/A
N/A
support Confirmation Code (CDCVM)? | Yes | Mandatory | Yes | Use Configuration to set the value | |
Does the reader support No CVM? | Yes | Mandatory | Yes | Use Configuration to set the value | |
3.3 Transaction Type | |||||
Does the reader support Purchase transactions ? | Yes | Mandatory | Yes | Use TRD to set the value | |
Does the reader support Purchase with Cash-Back transactions ? | Yes/No | Optional | N/A | Use TRD to set the value | |
Does the reader support Refund transactions ? | Yes/No | Optional | Yes | Use TRD to set the value | |
3.4 Terminal Type | |||||
Online Only configuration must be supported | Yes | Mandatory | N/A | Yes | Use Configuration to set the value |
3.5 |
Storage | |||||
Does terminal support Data Storage? | Yes | Mandatory | Yes | Use Configuration to set the value | |
Does terminal support Extended Logging? | Yes | Mandatory | Yes | Use Configuration to set the value | |
3.6 Terminal Capabilities | |||||
Does terminal support Online ODA? | Yes | Mandatory | Yes | ||
Does terminal support Tearing Recovery? | Yes | Mandatory | Yes | Use Configuration to set the value | |
Is exception list supported? | Yes | Mandatory | N/A | Yes | |
Does the terminal allow the reader issuer update? |
No |
Mandatory | No | Use |
Configuration to set the |
Value |