...
Description: Specifies the acquirer's conditions that cause a transaction to be rejected on an offline only Terminal
DF20:
Name: TTIG DDA Indicator
Source: Icc
Format: Binary
Length: 1 - 1
Description:
DF21:
Name: Terminal Action Code - Denial
Source: Terminal
Format: Binary
Length: 5 - 5
Description: Specifies the acquirer's conditions that cause the denial of a transaction without attempting to go online
DF22:
Name: Terminal Action Code - Online
Source: Terminal
Format: Binary
Length: 5 - 5
Description: Specifies the acquirer's conditions that cause a transaction to be transmitted online on an online capable Terminal.
DF23:
Name: Reader Contactless Floor Limit
Source: Terminal
Format: Numeric
Length: 6 - 6
Description: Indicates the transaction amount above which transactions must be authorized online
DF24:
Name: Reader Contactless Transaction Limit (No Ondevice CVM)
Source: Terminal
Format: Numeric
Length: 6 - 6
Description: Indicates the transaction amount above which the transaction is not allowed, when on device cardholder verification is not supported.
DF25:
Name: Reader Contactless Transaction Limit (On-device CVM)
Source: Terminal
Format: Numeric
Length: 6 - 6
Description: Indicates the transaction amount above which the transaction is not allowed, when on device cardholder verification is supported.
DF26:
Name: Reader CVM Required Limit
Source: Terminal
Format: Numeric
Length: 6 - 6
Description: Indicates the transaction amount above which the Kernel instantiates the CVM capabilities field in Terminal Capabilities with CVM Capability – CVM Required.
DF27:
Name: Time Out Value
Source: Terminal
Format: Binary
Length: 2 - 2
Description: Defines the time in ms before the timer generates a TIMEOUT signal.
DF28:
Name: IDS Status
Source: Terminal
Format: Binary
Length: 1 - 1
Description: Indicates if the transaction performs an IDS read and/or write.
DF29:
Name: Outcome Parameter Set
Source: Kernel2
Format: Binary
Length: 8 - 8
Description: This data object is used to indicate to the Terminal the outcome of the transaction processing by the Kernel. Its value is an accumulation of results about applicable parts of the transaction.
DF2A:
Name: Discretionary Data Card (Track1)
Source: Terminal
Format: Text
Length: 0 - 56
Description: If Track 1 Data is present, then DD Card (Track1) contains a copy of the discretionary data field of Track 1 Data as returned by the Card in the file read using the READ RECORD command during a mag-stripe mode transaction
DF2B:
Name: Discretionary Data Card (Track2)
Source: Terminal
Format: Numeric
Length: 0 - 16
Description: DD Card (Track2) contains a copy of the discretionary data field of Track 2 Data as returned by the Card in the file read using the READ RECORD command during a mag-stripe mode transaction
DF2C:
Name: Magstripe CVM Capabilities - No CVM Required
Source: Terminal
Format: Binary
Length: 1 - 1
Description: Indicates the CVM capability of the Terminal/Reader in the case of a mag-stripe mode transaction when the Amount, Authorized (Numeric) is less than or equal to the Reader CVM Required Limit.
DF2D:
Name: Holdtime
Source: Terminal
Format: Numeric
Length: 6 - 6
Description: Indicates the default delay for the processing of the next MSG signal. The Message Hold Time is an integer in units of 100ms.
DF2D:
Name: Field Off Time (same as Holdtime)
Source: Terminal
Format: Numeric
Length: 6 - 6
Description:
DF2D:
Name: Field Off Time (same as Holdtime)
Source: Terminal
Format: Numeric
Length: 6 - 6
Description:
DF30:
Name: Hold Time Value
Source: Terminal
Format: Binary
Length: 1 - 1
Description: Indicates the time that the field is to be turned off after the transaction is completed if requested to do so by the cardholder device. The Hold Time Value is in units of 100ms.
DF30:
Name: Bitmap Entry Point
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF31:
Name: Phone Message Table
Source: Terminal
Format: Binary
Length: 0 - 255
Description: The Phone Message Table is a variable length list of entries of eight bytes each, and defines for the selected AID the message and status identifiers as a function of the POS Cardholder Interaction Information.
DF31:
Name: Online Tag List
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
DF32:
Name: Minimum Relay Resistance Grace Period
Source: Terminal
Format: Binary
Length: 2 - 2
Description: The Minimum Relay Resistance Grace Period and Maximum Relay Resistance Grace Period represent how far outside the window defined by the Card that the measured time may be and yet still be considered acceptable. The Minimum Relay Resistance Grace Period is expressed in units of hundreds of microseconds.
DF32:
Name: Status Zero Amount Allowed Flag
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF33:
Name: Extended Selection Flag
Source:
Format:
Length: -
Description:
DF33:
Name: Maximum Relay Resistance Grace Period
Source: Terminal
Format: Binary
Length: 2 - 2
Description: The Minimum Relay Resistance Grace Period and Maximum Rela Resistance Grace Period represent how far outside the window defined by the Card that the measured time may be and yet still be considered acceptable. The Maximum Relay Resistance Grace Period is expressed in units of hundreds of microseconds.
DF34:
Name: Mandatory Tag Object List (MTOL)
Source: Kernel1
Format: Binary
Length: -
Description:
DF34:
Name: Terminal Expected Transmission Time For Relay Resistance C-APDU
Source: Terminal
Format: Binary
Length: 2 - 2
Description: Represents the time that the Kernel expects to need for transmitting the EXCHANGE RELAY RESISTANCE DATA command to the Card. The Terminal Expected Transmission Time For Relay Resistance C-APDU is expressed in units of hundreds of microseconds
DF35:
Name: Authentication Data Tag Obje (ATDTOL)
Source: Kernel1
Format: Binary
Length: -
Description:
DF35:
Name: Terminal Expected Transmission Time For Relay Resistance R-APDU
Source: Terminal
Format: Binary
Length: 2 - 2
Description: Represents the time that the Kernel expects that the Card will need for transmitting the EXCHANGE RELAY RESISTANCE DATA R-APDU. The Terminal Expected Transmission Time For Relay Resistance R-APDU is expressed in units of hundreds of microseconds.
DF36:
Name: Relay Resistance Accuracy Threshold
Source: Terminal
Format: Binary
Length: 2 - 2
Description: Represents the threshold above which the Kernel considers the variation between Measured Relay Resistance Processing Time and Max Time For Processing Relay Resistance APDU no longer acceptable. The Relay Resistance Accuracy Threshold is expressed in units of hundreds of microseconds.
DF37:
Name: Relay Resistance Transmission Time Mismatch Threshold
Source:
Format:
Length: -
Description:
DF38:
Name: RRP Counter
Source:
Format:
Length: -
Description:
DF39:
Name: RFU
Source:
Format:
Length: -
Description:
DF3A:
Name: RFU
Source:
Format:
Length: -
Description:
DF3B:
Name: Atos
Source:
Format:
Length: -
Description:
DF3C:
Name: RFU
Source:
Format:
Length: -
Description:
DF3D:
Name: RFU
Source:
Format:
Length: -
Description:
DF3E:
Name: RFU
Source:
Format:
Length: -
Description:
DF3F:
Name: RFU
Source:
Format:
Length: -
Description:
DF41:
Name: Measured Relay Resistance Processing Time
Source:
Format:
Length: -
Description:
DF42:
Name: RFU
Source:
Format:
Length: -
Description:
DF43:
Name: RFU
Source:
Format:
Length: -
Description:
DF44:
Name: RFU
Source:
Format:
Length: -
Description:
DF45:
Name: RFU
Source:
Format:
Length: -
Description:
DF46:
Name: RFU
Source:
Format:
Length: -
Description:
DF47:
Name: RFU
Source:
Format:
Length: -
Description:
DF48:
Name: RFU
Source:
Format:
Length: -
Description:
DF49:
Name: RFU
Source:
Format:
Length: -
Description:
DF4A:
Name: RFU
Source:
Format:
Length: -
Description:
DF4B:
Name: POS Cardholder Interaction Information
Source: Icc
Format: Binary
Length: 3 - 3
Description: The POS Cardholder Interaction Information informs the Kernel about the indicators set in the mobile phone that may influence the action flow of the merchant and cardholder.
DF4C:
Name: RFU
Source:
Format:
Length: -
Description:
DF4D:
Name: RFU
Source:
Format:
Length: -
Description:
DF51:
Name: Terminal Relay Resistance Entropy
Source:
Format:
Length: -
Description:
DF52:
Name: RFU
Source:
Format:
Length: -
Description:
DF53:
Name: Device Relay Resistance Entropy
Source:
Format:
Length: -
Description:
DF54:
Name: Min Time For Processing Relay Resistance APDU
Source:
Format:
Length: -
Description:
DF55:
Name: Max Time For Processing Relay Resistance APDU
Source:
Format:
Length: -
Description:
DF56:
Name: L1 error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF56:
Name: Device Estimated Transmission Time For Relay Resistance R-APDU
Source:
Format:
Length: -
Description:
DF57:
Name: L2 error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF58:
Name: L3 error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF59:
Name: SW1SW2
Source: Terminal
Format: Binary
Length: 2 - 2
Description:
DF5A:
Name: Message on error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF5B:
Name: RFU
Source:
Format:
Length: -
Description:
DF5C:
Name: RFU
Source:
Format:
Length: -
Description:
DF5D:
Name: RFU
Source:
Format:
Length: -
Description:
DF60:
Name: DS Input (Card)
Source: Kernel2
Format: Binary
Length: 8 - 8
Description: Contains Terminal provided data if permanent data storage in the Card was applicable (DS Slot Management Control[8]=1b), remains applicable, or becomes applicable (DS ODS Info[8]=1b). Otherwise this data item is a filler to be supplied by the Kernel. The data is forwarded to the Card with the GENERATE AC command, as per DSDOL formatting
DF61:
Name: DS Digest H
Source: Kernel2
Format: Binary
Length: 8 - 8
Description: Contains the result of OWHF2(DS Input (Term)) or OWHF2AES(DS Input (Term)), if DS Input (Term) is provided by the Terminal
DF62:
Name: DS ODS Info
Source: Kernel2
Format: Binary
Length: 1 - 1
Description: Contains Terminal provided data to be forwarded to the Card with the GENERATE AC command, as per DSDOL formatting
DF63:
Name: DS ODS Term
Source: Kernel2
Format: Binary
Length: 0 - 160
Description: Contains Terminal provided data to be forwarded to the Card with the GENERATE AC command, as per DSDOL formatting
DF64:
Name: Torn Record
Source: Terminal
Format:
Length: -
Description:
DF65:
Name: PDOL Related Data
Source: Terminal
Format:
Length: -
Description:
DF66:
Name: CDOL1 Related Data
Source: Terminal
Format:
Length: -
Description:
DF67:
Name: DRDOL Related Data
Source: Terminal
Format:
Length: -
Description:
DF68:
Name: Reference Parameter
Source: Terminal
Format:
Length: -
Description:
DF6A:
Name: RFU
Source:
Format:
Length: -
Description:
DF6B:
Name: RFU
Source:
Format:
Length: -
Description:
DF6C:
Name: RFU
Source:
Format:
Length: -
Description:
DF6D:
Name: RFU
Source:
Format:
Length: -
Description:
DF6E:
Name: Threshold Value for Biased Random Selection
Source:
Format:
Length: -
Description:
DF6F:
Name: Maximum Target Percentage
Source:
Format:
Length: -
Description:
DF70:
Name: Target Percentage
Source:
Format:
Length: -
Description:
DF71:
Name: RFU
Source:
Format:
Length: -
Description:
DF72:
Name: AgnosTVR
Source:
Format:
Length: -
Description:
DF73:
Name: Default TAC Default
Source: Terminal
Format: Binary
Length: 5 - 5
Description:
DF74:
Name: Default TAC Denial
Source: Terminal
Format: Binary
Length: 5 - 5
Description:
DF75:
Name: Default TAC Online
Source: Terminal
Format: Binary
Length: 5 - 5
Description:
DF76:
Name: RFU
Source:
Format:
Length: -
Description:
DF77:
Name: RFU
Source:
Format:
Length: -
Description:
DF78:
Name: RFU
Source:
Format:
Length: -
Description:
DF79:
Name: Cardholder Confirmation
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7A:
Name: PSE Selection
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7B:
Name: PIN Bypass
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7C:
Name: CDA Mode
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7D:
Name: RFU
Source:
Format:
Length: -
Description:
DF7E:
Name: Partial AID Selection
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7F:
Name: Force Transaction To Go Online
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
FF01:
Name: Torn Record
Source: Terminal
Format: Binary
Length: 0 - 255
Description: A copy of a record from the Torn Transaction Log that is expired. Torn Record is sent to the Terminal as part of the Discretionary Data.
FF02:
Name: Tags To Write Before Gen AC
Source: Terminal
Format: Binary
Length: 0 - 255
Description: List of data objects indicating the Terminal data writing requests to be sent to the Card before processing the GENERATE AC command or the RECOVER AC command.
FF03:
Name: Tags To Write After Gen AC
Source: Terminal
Format: Binary
Length: 0 - 255
Description: Contains the Terminal data writing requests to be sent to the Card after processing the GENERATE AC command or the RECOVER AC command.
FF04:
Name: Data To Send
Source: Terminal
Format: Binary
Length: 0 - 255
Description: List of data objects that contains the accumulated data sent by the Kernel to the Terminal in a DEK signal
FF05:
Name: Data Record
Source: Terminal
Format: Binary
Length: 0 - 255
Description: The Data Record is a list of TLV encoded data objects returned with the Outcome Parameter Set on the completion of transaction processing
FF06:
Name: Discretionary Data
Source: Terminal
Format: Binary
Length: 0 - 255
Description: The Discretionary Data is a list of Kernel-specific data objects sent to the Terminal as a separate field in the OUT signal
FF31:
Name: DET Delimiter
Source: Terminal
Format: Binary
Length: 0 - 255
Description: DET Delimiter
FF32:
Name: RFU
Source:
Format:
Length: -
Description:
FF33:
Name: AID Delimiter (PROCESSING)
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF34:
Name: RFU
Source:
Format:
Length: -
Description:
FF35:
Name: Entry Point Delimiter
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF36:
Name: DRL Set Delimiter
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF37:
Name: DRL Set Configuration
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF38:
Name: Update condition delimiter
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF40:
Name: PROCESSING other tlvs delimiter
Source:
Format:
Length: -
Description: