Table of Contents |
---|
TERMINAL, PROCESSING, and ENTRY POINT are the 3 main configuration files used by Agnos.
Terminal Configuration
Code Block |
---|
1. In Configuration->Terminal Configuration->Contact Only, set the parameters for: |
If a contact reader exists (EMV) and/or a magstripe reader (magstripe)
The terminal country code, type, capabilities, additional capabilities…
Code Block |
---|
2. In Configuration->Terminal Configuration->Contactless Only, set the parameters for: |
...
Code Block |
---|
3. You have to send the configuration to the terminal using the "Send" button 4. You can save your configuration with the "Save" or "Save As" button and reload it after using the "Open" button |
Processing Configuration
Code Block |
---|
1. In Configuration->Processing, load the default test plan configuration, with the "ACE" button: |
...
You have to select the Authority or library name
You have to select the test configuration
Then click “Ok” to refresh the ACE Client window.
Code Block |
---|
2. If required, you have to update the parameters to match your ICS 3. You have to send the PROCESSING configuration to the terminal using the "Send" button 4. You can save your own Processing configuration using the "Save" or "Save As" button 5. You can reload your own configuration using the "Load" button |
EntryPoint Configuration
Code Block |
---|
1. In Configuration->EntryPoint, load the default test plan configuration, with the "ACE" button for contactless tests only: |
...