...
The list of options presented here reflects the qualification reference used at Amadis to test Agnos kernels with appropriate tools (EVAL or ICC Solutions). It doesn't reflect TA requirements nor most up-to-date optional/mantory features released by payment networks. Please refer to your lab to validate your ICS before any debug or TA.
This reference ICS doesn't document Interac values to be set (i.e., customers requirements) but Agnos supported values and how to set them in regards with any potential Flash ICS.
Reader Characteristics | Supported Values | Agnos | Configuration Values | Recommendations | Comments |
---|---|---|---|---|---|
a.3 Contactless only | Yes/No | Optional | No | Use ENTRYPOINT Config to set the value | |
a.3.1 Contact application at other terminal | Yes/No | Optional | No | Use ENTRYPOINT Config to set the value | |
a.1 Magstripe interface at terminal | Yes/No | Optional | No | L3 Perspective. Use ENTRYPOINT Config to set the value | |
a.2 Contact interface at terminal | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value | |
a.5 Is the device a Transit Terminal | Yes/No | Optional | MTI=04 | No | |
b.1 Display | Yes | Mandatory | Fixed | L3 perspective. Depends on platform. Use ENTRYPOINT Config to set the value | |
b.2 Connected to a terminal with a display | No | Mandatory | Fixed | N/A | L3 perspective. Depends on platform |
c.1 Terminal is online capable | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value | |
c.2 Terminal is offline only | No | Mandatory | Fixed | N/A | |
c.2 Terminal is online only | Yes/No | Optional | No | Use ENTRYPOINT Config to set the value | |
d.1 Terminal supports online PIN | Yes/No | Optional | No | ||
d.2 Non zero contactless floor limits | Yes/No | Optional | Yes | ||
e.1 CDA at 1st GENAC | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value. Performance perspective (2 RSA computations while card in field) | |
f.1 Transaction login | No | Not Supported | N/A | N/A | |
g.1 Printer | Yes/No | Optional | N/A | Yes | L3 perspective. Depends on platform |
h.1 EMV legacy floor limit | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value | |
j.1 Purchase | Yes/No | Optional | N/A | Yes | L3 perspective |
j.2 Refund | Yes/No | Optional | N/A | Yes | L3 perspective |
j.3 Reversal | Yes/No | Optional | N/A | No | L3 perspective |
j.4 Pre-Auth | Yes/No | Optional | N/A | Yes | L3 perspective |
l.1 Form factor 00-01-02 | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value | |
l.2 Form factor 03 | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value | |
m.1 Specification v1.6 | Yes/No | Optional | Yes | Use ENTRYPOINT Config to set the value | |
Transit Option Supported | Yes/No | Optional | Autorun mode | No | Autorun Mode is a level 3 perspective |
x.1 Maximum Target Percentage | 00 | Variable | 50 | Use ENTRYPOINT Config to set the value | |
x.2 Target Percentage | 00 | Variable | 30 | Use ENTRYPOINT Config to set the value | |
x.3 Threshold Value | 000000 | Variable | 000000 | Use ENTRYPOINT Config to set the value | |
x.4 Merchant Type Indicator | 03 | Optional | N/A | Use ENTRYPOINT Config to set the value |
...