...
Now the tests need to be run for different profiles.
4.1: Then for each configuration profiles using the Switch Profile button:
...
4.2. An EVAL popup appears indicating what are the configuration or settings to apply to the reader, as for example:
...
Then for each EVAL configuration part of the current Profile:
...
4.
...
3 in ACE Client in the SETUP tab, adapt the tags to overload from the ACE Server configuration:
...
...
4.3.a Check the Use Default (Overload tags value with …)
...
4.3.b Enter the value for tag 9F35, 9F33 …
...
4.3.b.1 Overload tag 9F33 in ENTRY POINT for these options:
(leave Byte 2, bit 8 to 0, set No CVM required option to 1 Byte 2 bit 4)
...
Note: For profiles requesting no explicit values for SDA and CDA, set these 2 values to 1.
4.3.b.2 Overload tag 9F35 in ENTRYPOINT for these values (Offline Only/Online Only):
Merchant Controlled:
21 – Attended, Online only
...
26 – Unattended, Offline only
...
4.3.c in ACE Client in the CONFIGURATION/ENTRYPOINT once you have loaded the ACE Server Configuration:
...
4.3.
...
c.
...
1: Use tag DF1B in ENTRY POINT for these options:
Mobile CVM: Byte 5, bit 3
Terminal Exempt Of No CVM Checks: No CVM Check exempt: Byte 5, bit 2
...
Only EMV Mode: Byte 6, bit 7
...
4.3.
...
c.
...
2: Use tag DF30 in ENTRY POINT for these options:
Zero Amount Checking Flag: Byte 1, bit 7
Status Check: Byte 1, bit 8
...
4.3.
...
c.
...
3: Use tag 9F40 in ENTRY POINT for these options:
Goods: Byte 1, bit 7
Services: Byte 1, bit 6
5th Step:
...
Send the ENTRY POINT configuration to the device
5.1
...
: Execute the tests for a specific configuration.
...
5.2: Check if another configuration is expected in this Profile. If there is one, change the configuration and execute the test.
If end of all configs or per config, change the library to make the profile tests for both library.
If there is not any test left in that config change go back to step 4.1
...