Table of Contents |
---|
...
The very step to avoid difficult integration times: unit test the external communication with ACE.
Code Block | ||||
---|---|---|---|---|
| ||||
// NAME....... Tutorial #1 // PURPOSE.... This code presents how to connect onto ACE and to use aceOut // // Hypothesis and optimizations: // Communication between ACE and acceptance device is IP // // PROJECT.... Wiki // REFERENCES. -- // // Copyright ©2005-2020 - 9164-4187 QUEBEC INC (“AMADIS”), All Rights Reserved // //--------------------------------------------------------- // Main //--------------------------------------------------------- int main(int argc, char** argv) { // Communication int port, length; char address[50]=""; // Get Communication parameters from ini file // These paramerters maybe wired inside the code for training purposes xgpiIniSetFilename("agnos.ini"); xgpiIniGetString("COM", "Address", 50, address, &length); xgpiIniGetNumeric("COM", "Port", &port); // Initialize ACE // Initialize generic communication interface assert(tcpInit(0) == TCP_NO_ERROR); // Create server and client assert(comtcpOpen(&gACEServerCOMTCP, TCP_SERVER, 0, port) == COM_NO_ERROR); assert(comtcpOpen(&gACEClientCOMTCP, TCP_CLIENT, address, 1979) == COM_NO_ERROR); // Set ACE with server and client aceInitializeCommunication(&gACEServerCOMTCP.com,&gACEClientCOMTCP.com); // Initialize running mode aceSetMode(pmSDK); // Set ACE option aceSetUIDisplay(bTRUE); // Trace into ACE aceOut("Training Session - BEGIN\n"); aceOut("Hello World!\n"); aceOut("Training Session - END\n"); return 0; } |
...
Code Block | ||||
---|---|---|---|---|
| ||||
// NAME....... Tutorial #7#8 // PURPOSE.... This code presents how to poll logfor APDUcard infrom batchpayment modeapplication // // Hypothesis and optimizations: // Communication between ACE and acceptance device is IP // // PROJECT.... Wiki // REFERENCES. -- // // Copyright ©2005-2020 - 9164-4187 QUEBEC INC (“AMADIS”), All Rights Reserved // //--------------------------------------------------------- // Main //--------------------------------------------------------- int main(int argc, char** argv) { // See previous examples to get a PAYMENT request from ACE processRequest(buffer+1,len-1,pay); char* parameters; tStartingPoint sp = spSTART_A; // To initiate contactless transaction at preprocessing step char line1[100]="",line2[100]=""; // Initialize GPI // This is platform dependent. On Kizis AVT, this set PCSC readers' name from agnos.ini gpiMain(0,¶meters); // Load available kernels enpConnectPaymentServices("./AGNOS/"); // Set contactless configurations dtmInitializeFromFile("./AGNOS/",NULL,NULL,NULL,NULL,NULL,pay->mTransactionType,bFALSE); // Initialization entry point enpInitialize("","",bFALSE,bFALSE,bFALSE,pay); // No more signal managed now tTerminalContext *terminalCtx = NULL; tByte technoToDetect = TECHNO_CL_TYPE_EMV; tGPIError gpiError = 0; terminalCtx = (tTerminalContext*)dtmGetData(TERMINAL_CTX); if(terminalCtx->mMagstripe) { technoToDetect |= TECHNO_MAGSTRIPE; } if(terminalCtx->mEMVContact) { technoToDetect |= TECHNO_CONTACT; } gpiSetTechnoToDetect(technoToDetect); sprintf(line1,"PAY"); if(pay->mAmount) { sprintf(line2,"AMOUNT: %.2f",(*pay->mAmount)/100.0); } else { sprintf(line2,"--"); } gpiDisplayMessage(gpi_true,line1); gpiDisplayMessage(gpi_false,line2); gpiError = gpiPolling("",5); // timeout set to 5 seconds sprintf(tmp,"GPI ERROR: 0x%.4X\n",gpiError); aceOut(tmp); if(scrINTERRUPTED == gpiError) { sprintf(tmp,"TRANSACTION INTERRUPTED\n"); aceOut(tmp); } else if(polTIMEOUT == gpiError) { sprintf(tmp,"No Tap\n"); aceOut(tmp); } else { sprintf(tmp,"CARD DETECTED FROM L3\n"); aceOut(tmp); enpSkipPollingOnNextStartB(gpiError); enpExecutePaymentTransaction(sp,pay,out); // Call main entry point primitive to trigger a transaction if (ocONLINE_REQUEST == out->mOutCome) { gpiDisplayMessage(gpi_true,"ONLINE"); length = 0; pmwGetEMVData( pay->mSession,(tByte*)"\x9F\x02\x95\x9F\x26\x9F\x27",7, pay->mDataExchange.mDataRecord.mStream,&pay->mDataExchange.mDataRecord.mLength); // For example, use ACE to emulate online auth. aceSendContactlessAuthorization(pay,bFALSE); if (TC == pay->mCID) { gpiDisplayMessage(gpi_true,"APPROVED"); } else { gpiDisplayMessage(gpi_true,"DECLINED"); } } else if (ocAPPROVED == out->mOutCome) { gpiDisplayMessage(gpi_true,"APPROVED"); } else { gpiDisplayMessage(gpi_true,"DECLINED"); } } // Clean session closing (will switch antenna off) pay->mDataExchange.mError.mL1 = erL1OK; // Avoid display message within entry point out->mUIReqOnRestartPresent = bFALSE; // Avoid display message within entry point enpExecutePaymentTransaction(spNO_START,pay,out); // Acknowledge ACE and sends several tags for receipt printing... ackPayment(pay,out,((pay->mPOSEntryMode == EMV_CL_MODE) || (pay->mPOSEntryMode == MAG_CL_MODE))); // UI stuff.. gpiClearScreen(); gpiDisplayMessageByID(gpi_true,currentLanguage,THANKS); gpiSwitchLED(LED_1,gpi_false,0); gpiSwitchLED(LED_2,gpi_false,0); gpiSwitchLED(LED_3,gpi_false,0); gpiSwitchLED(LED_4,gpi_false,0); aceOut("Training Session - END\n"); return 0; } |
...
Code Block | ||||
---|---|---|---|---|
| ||||
// NAME....... Tutorial #7#9 // PURPOSE.... This code presents how to logintegrated APDU in batch modedata exchange // // Hypothesis and optimizations: // Communication between ACE and acceptance device is IP // // PROJECT.... Wiki // REFERENCES. -- // // Copyright ©2005-2020 - 9164-4187 QUEBEC INC (“AMADIS”), All Rights Reserved // //--------------------------------------------------------- // Main //--------------------------------------------------------- int main(int argc, char** argv) { // See previous examples to get a PAYMENT request from ACE processRequest(buffer+1,len-1,pay); char* parameters; tStartingPoint sp = spSTART_A; // To initiate contactless transaction at preprocessing step char line1[100]="",line2[100]=""; // Initialize GPI // This is platform dependent. On Kizis AVT, this set PCSC readers' name from agnos.ini gpiMain(0,¶meters); // Load available kernels enpConnectPaymentServices("./AGNOS/"); // Set contactless configurations dtmInitializeFromFile("./AGNOS/",NULL,NULL,NULL,NULL,NULL,pay->mTransactionType,bFALSE); // Initialization entry point enpInitialize("","",bFALSE,bFALSE,bFALSE,pay); // No more signal managed now tTerminalContext *terminalCtx = NULL; tByte technoToDetect = TECHNO_CL_TYPE_EMV; tGPIError gpiError = 0; terminalCtx = (tTerminalContext*)dtmGetData(TERMINAL_CTX); if(terminalCtx->mMagstripe) { technoToDetect |= TECHNO_MAGSTRIPE; } if(terminalCtx->mEMVContact) { technoToDetect |= TECHNO_CONTACT; } gpiSetTechnoToDetect(technoToDetect); sprintf(line1,"PAY"); if(pay->mAmount) { sprintf(line2,"AMOUNT: %.2f",(*pay->mAmount)/100.0); } else { sprintf(line2,"--"); } gpiDisplayMessage(gpi_true,line1); gpiDisplayMessage(gpi_false,line2); gpiError = gpiPolling("",5); // timeout set to 5 seconds sprintf(tmp,"GPI ERROR: 0x%.4X\n",gpiError); aceOut(tmp); if(scrINTERRUPTED == gpiError) { sprintf(tmp,"TRANSACTION INTERRUPTED\n"); aceOut(tmp); } else if(polTIMEOUT == gpiError) { sprintf(tmp,"No Tap\n"); aceOut(tmp); } else { sprintf(tmp,"CARD DETECTED FROM L3\n"); aceOut(tmp); // Use DF12 - TAGS to READ - inside contactless combination // DF12015A will trigger the data exchange mechanism when tag 5A will be found pay->mDataExchange.mCallback = &myDEProcess; pay->mDataExchange.mDEList = &gDEListCtx; enpSkipPollingOnNextStartB(gpiError); enpExecutePaymentTransaction(sp,pay,out); // Call main entry point primitive to trigger a transaction if (ocONLINE_REQUEST == out->mOutCome) { gpiDisplayMessage(gpi_true,"ONLINE"); length = 0; pmwGetEMVData( pay->mSession,(tByte*)"\x9F\x02\x95\x9F\x26\x9F\x27",7, pay->mDataExchange.mDataRecord.mStream,&pay->mDataExchange.mDataRecord.mLength); // For example, use ACE to emulate online auth. aceSendContactlessAuthorization(pay,bFALSE); if (TC == pay->mCID) { gpiDisplayMessage(gpi_true,"APPROVED"); } else { gpiDisplayMessage(gpi_true,"DECLINED"); } } else if (ocAPPROVED == out->mOutCome) { gpiDisplayMessage(gpi_true,"APPROVED"); } else { gpiDisplayMessage(gpi_true,"DECLINED"); } } // Clean session closing (will switch antenna off) pay->mDataExchange.mError.mL1 = erL1OK; // Avoid display message within entry point out->mUIReqOnRestartPresent = bFALSE; // Avoid display message within entry point enpExecutePaymentTransaction(spNO_START,pay,out); // Acknowledge ACE and sends several tags for receipt printing... ackPayment(pay,out,((pay->mPOSEntryMode == EMV_CL_MODE) || (pay->mPOSEntryMode == MAG_CL_MODE))); // UI stuff.. gpiClearScreen(); gpiDisplayMessageByID(gpi_true,currentLanguage,THANKS); gpiSwitchLED(LED_1,gpi_false,0); gpiSwitchLED(LED_2,gpi_false,0); gpiSwitchLED(LED_3,gpi_false,0); gpiSwitchLED(LED_4,gpi_false,0); aceOut("Training Session - END\n"); return 0; |