...
Reader Characteristics | Reference Values | Agnos | Configuration Values | Recommendations | Comments |
---|---|---|---|---|---|
a.3 Contactless only | Yes/No | Optional | No | Use COMBINATION to set the value | |
a.3.1 Contact applpication at other terminal | Yes/No | Optional | No | Use COMBINATION to set the value | |
a.1 Magstripe interface at terminal | Yes/No | Optional | No | L3 Perspective. Use COMBINATION to set the value | |
a.2 Contact interface at terminal | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
b.1 Display | Yes | Mandatory | Fixed | L3 perspective. Depends on platform. Use COMBINATION to set the value | |
b.2 Connected to a terminal with a display | No | Mandatory | Fixed | N/A | L3 perspective. Depends on platform |
c.1 Terminal is online capable | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
c.2 Terminal is offline only | No | Mandatory | Fixed | N/A | |
c.2 Terminal is online only | Yes/No | Optional | No | Use COMBINATION to set the value | |
d.1 Terminal supports online PIN | Yes/No | Optional | No | ||
d.2 Non zero contactless floor limits | Yes/No | Optional | Yes | ||
e.1 CDA at 1st genac | Yes/No | Optional | Yes | Use COMBINATION to set the value. Performance perspective (2 RSA computations while card in field) | |
f.1 Transaction login | No | Not Supported | N/A | N/A | |
g.1 Printer | Yes/No | Optional | N/A | Yes | L3 perspective. Depends on platform |
h.1 EMV legacy floor limit | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
j.1 Refund | Yes/No | Optional | N/A | Yes | L3 perspective |
j.2 Reversal | Yes/No | Optional | N/A | No | L3 perspective |
j.3 Pre-Auth | Yes/No | Optional | N/A | Yes | L3 perspective |
l.1 Form factor 00-01-02 | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
l.2 Form factor 03 | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
m.1 Specification v1.5 | Yes/No | Optional | Yes | Use COMBINATION to set the value | |
x.1 Maximum Target Percentage | 00 | Variable | 50 | Use COMBINATION to set the value | |
x.2 Target Percentage | 00 | Variable | 30 | Use COMBINATION to set the value | |
x.3 Threshold Value | 000000 | Variable | 000000 | Use COMBINATION to set the value | |
x.4 Merchant Type Indicator | 03 | Optional | N/A | Use COMBINATION to set the value |
...