...
Configurations are modified and sent to acceptance system.
TMS/Administrative settings are modified and sent to acceptance system.
Transactions are started on acceptance device
signals are updated during the transactions
...
Field | Comment | Value |
---|---|---|
Port | Listening Port | IP port between 50000 and 65535 |
Automatic Start | Activate/Deactivate the VCAS server start when ACE-Client is started | 0 or 1 |
TTQ | Default value of the TTQ in the configurations | any valid TTQ value |
Administrative | Administrative default value | Any Administrative Value |
Administrative
...
Field
...
Forced Value
...
Contactless
...
1
...
Trace Depth
...
6 for APDU log delay
...
Key In
...
0
...
Signal
...
1
...
Polling timeout
...
any value (like 10) as it will be automatically modified by VCAS
...
APDU Log
...
0 for APDU log delay in Agnos Framework 3.3
1 in Agnos Framework 3.5
...
PayPass Legacy
...
0
...
Amex Legacy
...
0
...
JCB Legacy
...
0
...
CUP Legacy
...
0
...
DPAS Legacy
...
0
...
Visa Legacy
...
1
...
Digital Signals
...
1
Online Only | Defines if the acceptance system is online only | 1 for online only 0 otherwise |
Agnos v3.3 | Defines the version of Agnos Framework | 1 for framework 3.3 0 otherwise |
Troubleshooting
If you need us to investigate anything related to VCAS, perform the test/transaction then:
...
send the CAKeys to acceptance system
change TERMINAL configuration and send it to acceptance system
change PROCESSING configuration and send it to acceptance system
change ENTRY_POINT configuration and send it to acceptance system
What does PrepareTransaction do
change the TMS/Administrative settings in acceptance system. The values in the table below are set/modified:
Field | Forced Value |
---|---|
Contactless | 1 |
Trace Depth | 6 for APDU log delay |
Key In | 0 |
Signal | 1 |
Polling timeout | VCAS tool gives the value of the polling timeout |
APDU Log | 0 if Agnos v3.3 is ticked 1 for the other frameworks |
PayPass Legacy | 0 |
Amex Legacy | 0 |
JCB Legacy | 0 |
CUP Legacy | 0 |
DPAS Legacy | 0 |
Visa Legacy | 1 |
Digital Signals | 1 |
The other values may depend on the ICS.
Is StopCurrentTransaction supported?
No.The StopCurrentTransaction() function is conditional only if pre-defined timeout (Tag: 0x24) can be set correctly via the SetConfig() function.
The pre-defined timeout is modified through the TMS/Administrative and PrepareTransaction. For performance reasons (transaction duration), StopCurrentTransaction is not supported.
...