Agnos Entry Point |
---|
See entrypoint.h, loader.h |
#include
| Code Block |
---|
| //---- AgnosMW Headers ----
#include "paymentMW.h"
//---- Global Headers ----
#include "gpi_agnos_framework_globals.h" |
| -- |
ApplicationSelectionMethod
| Code Block |
---|
typedef tPaymentError (*ApplicationSelectionMethod)
(
tADFList *mutualList,
tByte *MLIndex, tBoolean CL
); |
| Callback definition. Called after PPSE selection if defined |
KernelSelectionMethod
| Code Block |
---|
typedef tBoolean (*KernelSelectionMethod)
(
tByte* kernelIdentifier,
tByte kernelIdentifierLen,
tByte* requestedKernelIdentifier
); |
| Callback definition. Called duration during combination selection if defined |
enpConnectPaymentServices
| Code Block |
---|
| DLLEXPORT void enpConnectPaymentServices(const tString path) |
| Connect entry point onto available L2 CL kernels. This call shall be performed only when the system is cycled up |
enpDisconnectPaymentServices
| Code Block |
---|
| DLLEXPORT void enpDisconnectPaymentServices(void); |
| Disconnect entry point from connected L2 CL kernels. This call shall be performed only when the system is cycled up |
enpInitialize
| Code Block |
---|
| DLLEXPORT void enpInitialize
(
tString readerName,
tString pinpadName,
tBoolean signal,
tBoolean fallbackOnAID, // DEPRECATED
tBoolean entryPoint, // DEPRECATED
tPaymentContext *payment //In: may be NULL is not autorun (contactless mechanism)
); |
| Set internal context to prepare the entry point for the subsequent transaction Code Block |
---|
| // Standard call for a payment application
enpInitialize("","",bFALSE,bFALSE,bFALSE,NULL); |
Important: Prior to that call: |
enpSetLegacyXXXStatus
| Code Block |
---|
| DLLEXPORT void enpSetLegacyZIPStatus(tBoolean status); |
Code Block |
---|
| DLLEXPORT void enpSetLegacyPayPassStatus(tBoolean status); |
Code Block |
---|
| DLLEXPORT void enpSetLegacyAMEXStatus(tBoolean status); |
Code Block |
---|
| DLLEXPORT void enpSetLegacyJCBStatus(tBoolean status); |
Code Block |
---|
| DLLEXPORT void enpSetLegacyCUPStatus(tBoolean status); |
Code Block |
---|
| DLLEXPORT void enpSetLegacyDPASStatus(tBoolean status); |
Code Block |
---|
| DLLEXPORT void enpSetLegacyVISAStatus(tBoolean status); |
| Set Enable legacy selection rule for a given payment scheme. Payment schemes' specifications, outside Book Cx, use selection rules that might differ for error management. it is important to set appropriate flag duting TA |
enpSetPollingTimeout
| Code Block |
---|
| DLLEXPORT void enpSetPollingTimeout(int timeout); |
| Set timeout value used during gpiPolling to detect a card presentation |
enpSetLongTapTimeoutExpired
| Code Block |
---|
| DLLEXPORT void enpSetLongTapTimeoutExpired(void); |
| Indicate to the entry point that the online transaction has timed out and consequently the long tap has timed out |
enpGetPollingTimeout
| Code Block |
---|
| DLLEXPORT int enpGetPollingTimeout(void); |
| Return timeout value used during gpiPolling to detect a card presentation |
| Code Block |
---|
| DLLEXPORT tBoolean enpPSESelectionPerformed(void); |
| Deprecated |
enpGetPPSEFCI
| Code Block |
---|
| DLLEXPORT tPSE* enpGetPPSEFCI(tWord *SW1SW2); |
| Return PPSE’s FCI is stored at PPSE selection so payment application can fetch any proprietary tags like 9F0A (for example: , tag 9F0A, ASPRD). If SW1SW2 is defined then the entry point returns the status word |
enpGetMutualList
| Code Block |
---|
| DLLEXPORT tADFList *enpGetMutualList(void); |
| Return the mutual list calculated at PPSE selection time. See Agnos and Selection module to get details on tADFList |
enpAreAllCLAppplicationsNotAllowed
| Code Block |
---|
| DLLEXPORT tBoolean enpAreAllCLAppplicationsNotAllowed(void); |
| enpResetAreAllCLAppplicationsNotAllowed
| Code Block |
---|
| DLLEXPORT void enpResetAreAllCLAppplicationsNotAllowed(void); |
| Return bTRUE if there is no elligible contactless application after preprocessing. If no CL application is selectableelligible, provide a specific status so payment application which may fallback to CT contact or magstrtipe magstripe depeding on interfaces supported by the device |
enpResetAreAllCLAppplicationsNotAllowed
| Code Block |
---|
| DLLEXPORT void enpResetAreAllCLAppplicationsNotAllowed(void); |
| Reset corresponding state |
enpGetLastCardDetectionStatus
| Code Block |
---|
| DLLEXPORT tGPIError enpGetLastCardDetectionStatus(void); |
| Return the last gpiPolling error obtain at the last START_B |
enpSkipPollingOnNextStartB
| Code Block |
---|
| DLLEXPORT void enpSkipPollingOnNextStartB(tGPIError detectedStatus); |
| When gpiPolling is performed from outside the entry point, skip gpiPolling call from inside the entry point to avoid double tap |
enpReleasePaymentServices
| Code Block |
---|
| DLLEXPORT void enpReleasePaymentServices(const tBoolean sdk); |
| Broadcast afsRelease to all L2 CL kernels. This call shall be performed only when the system is cycled down. |
enpExecutePaymentTransaction
| Code Block |
---|
| DLLEXPORT void enpExecutePaymentTransaction
(
tStartingPoint sp,
tPaymentContext *payment,
tOutComeParameter *outcome
); |
| Main point of entry to initiate a CL transaction. tPaymentContext shall be set accordingly tOutcomeParameter provides final status in lign with L2 TA’s test plans Set sp to: spSTART_A: to initiate a new transaction spSTART_D: to activate the kernel used for the current transaction spNO_START: to clean the context
|
enpGetTerminalAID
| Code Block |
---|
| void enpGetTerminalAID(tByte aidId, tByte **aid, tByte *len); |
| |
enpGetCurrentTerminalAID
| Code Block |
---|
| void enpGetCurrentTerminalAID(tByte **aid, tByte *len); |
| |