DF51:
Name: Terminal Relay Resistance Entropy
Source:
Format:
Length: -
Description:
DF52:
Name: RFU
Source:
Format:
Length: -
Description:
DF53:
Name: Device Relay Resistance Entropy
Source:
Format:
Length: -
Description:
DF54:
Name: Min Time For Processing Relay Resistance APDU
Source:
Format:
Length: -
Description:
DF55:
Name: Max Time For Processing Relay Resistance APDU
Source:
Format:
Length: -
Description:
DF56:
Name: L1 error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF56:
Name: Device Estimated Transmission Time For Relay Resistance R-APDU
Source:
Format:
Length: -
Description:
DF57:
Name: L2 error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF58:
Name: L3 error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF59:
Name: SW1SW2
Source: Terminal
Format: Binary
Length: 2 - 2
Description:
DF5A:
Name: Message on error
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF5B:
Name: RFU
Source:
Format:
Length: -
Description:
DF5C:
Name: RFU
Source:
Format:
Length: -
Description:
DF5D:
Name: RFU
Source:
Format:
Length: -
Description:
DF60:
Name: DS Input (Card)
...
DF29:
Name: Outcome Parameter Set
Source: Kernel2
Format: Binary
Length: 8 - 8
Description: Contains Terminal provided data if permanent data storage in the Card was applicable (DS Slot Management Control[8]=1b), remains applicable, or becomes applicable (DS ODS Info[8]=1b). Otherwise this data item is a filler to be supplied by the Kernel. The data is forwarded to the Card with the GENERATE AC command, as per DSDOL formatting
DF61:
Name: DS Digest H
Source: Kernel2
Format: Binary
Length: 8 - 8
Description: Contains the result of OWHF2(DS Input (Term)) or OWHF2AES(DS Input (Term)), if DS Input (Term) is provided by the Terminal
DF62:
Name: DS ODS Info
Source: Kernel2
Format: Binary
Length: 1 - 1
Description: Contains Terminal provided data to be forwarded to the Card with the GENERATE AC command, as per DSDOL formatting
DF63:
Name: DS ODS Term
Source: Kernel2
Format: Binary
Length: 0 - 160
Description: Contains Terminal provided data to be forwarded to the Card with the GENERATE AC command, as per DSDOL formatting
DF64:
Name: Torn Record
Source: Terminal
Format:
Length: -
Description:
DF65:
Name: PDOL Related Data
Source: Terminal
Format:
Length: -
Description:
DF66:
Name: CDOL1 Related Data
Source: Terminal
Format:
Length: -
Description:
DF67:
Name: DRDOL Related Data
Source: Terminal
Format:
Length: -
Description:
DF68:
Name: Reference Parameter
Source: Terminal
Format:
Length: -
Description:
DF6A:
Name: RFU
Source:
Format:
Length: -
Description:
DF6B:
Name: RFU
Source:
Format:
Length: -
Description:
DF6C:
Name: RFU
Source:
Format:
Length: -
Description:
DF6D:
Name: RFU
Source:
Format:
Length: -
Description:
DF6E:
Name: Threshold Value for Biased Random Selection
Source:
Format:
Length: -
Description:
DF6F:
Name: Maximum Target Percentage
Source:
Format:
Length: -
Description:
DF70:
Name: Target Percentage
Source:
Format:
Length: -
Description:
DF71:
Name: RFU
Source:
Format:
Length: -
Description:
DF72:
Name: AgnosTVR
Source:
Format:
Length: -
Description:
DF73:
Name: Default TAC Default
Source: Terminal
Format: Binary
Length: 5 - 5
Description:
DF74:
Name: Default TAC Denial
This data object is used to indicate to the Terminal the outcome of the transaction processing by the Kernel. Its value is an accumulation of results about applicable parts of the transaction.
DF2A:
Name: Discretionary Data Card (Track1)
Source: Terminal
Format: Text
Length: 0 - 56
Description: If Track 1 Data is present, then DD Card (Track1) contains a copy of the discretionary data field of Track 1 Data as returned by the Card in the file read using the READ RECORD command during a mag-stripe mode transaction
DF2B:
Name: Discretionary Data Card (Track2)
Source: Terminal
Format: Numeric
Length: 0 - 16
Description: DD Card (Track2) contains a copy of the discretionary data field of Track 2 Data as returned by the Card in the file read using the READ RECORD command during a mag-stripe mode transaction
DF2C:
Name: Magstripe CVM Capabilities - No CVM Required
Source: Terminal
Format: Binary
Length: 5 - 5Description:
DF75:
Name: Default TAC Online
Source: Terminal
Format: Binary
Length: 5 - 5
Description:
DF76:
Name: RFU
Source:
Format:
Length: -
Description:
DF77:
Name: RFU
Source:
Format:
Length: -
Description:
DF78:
Name: RFU
Source:
Format:
Length: -
Description:
DF79:
Name: Cardholder Confirmation
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7A:
Name: PSE Selection
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
DF7B:
Name: PIN Bypass Indicates the CVM capability of the Terminal/Reader in the case of a mag-stripe mode transaction when the Amount, Authorized (Numeric) is less than or equal to the Reader CVM Required Limit.
DF2D:
Name: Holdtime
Source: Terminal
Format: Binary Numeric
Length: 1 6 - 16
Description:
...
Indicates the default delay for the processing of the next MSG signal. The Message Hold Time is an integer in units of 100ms.
DF2D:
Name: CDA Mode Field Off Time (same as Holdtime)
Source: Terminal
Format: Binary Numeric
Length: 1 6 - 16
Description:
...
DF2D:
Name: RFU
Source:
Format:
Length: -
Description:
DF7E:
Name: Partial AID Selection
Source: Field Off Time (same as Holdtime)
Source: Terminal
Format: Binary Numeric
Length: 1 6 - 16
Description:
...
DF30:
Name: Force Transaction To Go Online Hold Time Value
Source: Terminal
Format: Binary
Length: 1 - 1
Description:
FF01:
Name: Torn Record
Source: Terminal
Format: Binary
Length: 0 - 255
Description: A copy of a record from the Torn Transaction Log that is expired. Torn Record is sent to the Terminal as part of the Discretionary Data.
FF02:
Name: Tags To Write Before Gen AC
Source: Terminal
Format: Binary
Length: 0 - 255
Description: List of data objects indicating the Terminal data writing requests to be sent to the Card before processing the GENERATE AC command or the RECOVER AC command.
FF03:
Name: Tags To Write After Gen AC Indicates the time that the field is to be turned off after the transaction is completed if requested to do so by the cardholder device. The Hold Time Value is in units of 100ms.
DF30:
Name: Bitmap Entry Point
Source: Terminal
Format: Binary
Length: 0 1 - 2551
Description: Contains the Terminal data writing requests to be sent to the Card after processing the GENERATE AC command or the RECOVER AC command.
...
DF31:
Name: Data To Send Phone Message Table
Source: Terminal
Format: Binary
Length: 0 - 255
Description: List of data objects that contains the accumulated data sent by the Kernel to the Terminal in a DEK signal
FF05:
Name: Data Record
Source: Terminal
Format: Binary
Length: 0 - 255
Description: The Data Record is a list of TLV encoded data objects returned with the Outcome Parameter Set on the completion of transaction processing
FF06:
Name: Discretionary Data
Source: Terminal
Format: Binary
Length: 0 - 255
Description: The Discretionary Data is a list of Kernel-specific data objects sent to the Terminal as a separate field in the OUT signal
FF31:
Name: DET Delimiter
Source: Terminal
Format: Binary
Length: 0 - 255
Description: DET Delimiter
FF32:
Name: RFU
Source:
Format:
Length: -
Description:
FF33:
Name: AID Delimiter (PROCESSING)
Source: The Phone Message Table is a variable length list of entries of eight bytes each, and defines for the selected AID the message and status identifiers as a function of the POS Cardholder Interaction Information.
DF31:
Name: Online Tag List
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
...
DF32:
Name: RFU Minimum Relay Resistance Grace Period
Source:
Format:
Length: -
Description:
FF35:
Name: Entry Point Delimiter
Source: Terminal
Format: Binary
Length: 0 2 - 2552
Description:
...
The Minimum Relay Resistance Grace Period and Maximum Relay Resistance Grace Period represent how far outside the window defined by the Card that the measured time may be and yet still be considered acceptable. The Minimum Relay Resistance Grace Period is expressed in units of hundreds of microseconds.
DF32:
Name: DRL Set Delimiter Status Zero Amount Allowed Flag
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF37:
Name: DRL Set Configuration
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF38:
Name: Update condition delimiter
Source: Terminal
Format: Binary
Length: 0 - 255
Description:
FF40:
Name: PROCESSING other tlvs delimiter
Source:
Format:
Length: - 1 - 1
Description: